Xerox DocuColor 12 Printer with Matchprint Professional Server Document

Page of 3
                     
Customer Expectation Setting Document
Kodak Polychrome Graphics (KPG) Matchprint Professional Server IIx (MPS)
 Digital Front End for DocuColor 12 CP or LP
March 4, 2003 Revision
     1
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Customer Support
Server Installation
· 
The physical installation of the KPG Matchprint Professional Server
IIx (MPS) is done by the Delivery / Removal Carrier.
·  The customer will be responsible to verify the connection of the
MPS to the DocuColor 12 with simple instructions that are provided
by the D/R Carrier.  The Quick Start Guide contains information on
how to quickly begin using your Matchprint Professional Server IIx.
· 
Network Installation and configuration of this MPS on the network is
a customer responsibility.  Xerox Analysts support is available on a
fee basis.
 
 
Software Upgrades
· 
Periodically, Xerox will make available new software releases  that
will be customer installable.  It will be the customer’s responsibility
to perform the software upgrade activities.
 
 
Hotline numbers
·  The Xerox Customer Support Centers are available to provide
general information, answer questions, and take service calls.  You
can reach the Customer Support Center at the following toll-free
phone numbers:
 
United States                1-800-821-2797
 
       Canada                          1-800-939-3769
 
Please be prepared to provide both serial numbers for the MPS and
the DocuColor 12.
 
 
Analyst Services
·  A variety of services are available from your Xerox Systems
Analyst. All services are billable. Please contact your Sales
Representative for more information
.
 
 
Customer Training
· 
Customer Training is available on the KPG Matchprint Professional
Server IIx. All training is on a fee basis. Please contact your Sales
Representative for more information.
 
 
Supplies
·  With your unique nine digit customer number for the KPG
Matchprint Professional Server IIx, you may order the KPG
Matchprint Co-Branded Xerox Color Laser Proofing Papers that are
integral to creation of the value added output.  You will obtain this
customer number from your Xerox Sales Representative at the time
of your initial order.  Keep this number for future reference.
 
 
Reference Material
·  The KPG Matchprint Professional Server IIx is shipped with
Hardware Installation and Quick Start guides to start using the MPS
promptly.
· 
A comprehensive User Guide is included in the Software
installed on the MPS as received.  It may be printed for
hard copy reference.
Space Requirements / Service Space Envelope
The following diagram is intended only as a representation of the
installation requirements of a fully configured DocuColor 12 with the
KPG Matchprint Professional Server IIx.
 2”  (48 mm)
24” (310 mm)
Minimum Space Requirements
For the Server
30” (720 mm)
36”  (914 mm)
2”  (48 mm)
24” (310 mm)
30” (720 mm)
Work Surface
or server
From left side
36”  (914 mm)
Work Surface
or server
From left side
24” (310 mm)
DocuColor 12
Physical Information
Dimensions:
19.87"H x 8.89"W x 19.8"D
(50.47cm H x 22.58cm W x 50.29cm D)
Weight::
· 
Workstation: 50 lbs / 55lbs boxed for
shipping.
· 
Monitor: 12 lbs / 14 lbs boxed for
shipping
 
RIP Power Cord
length
 
6 '
 
Length of cable
connecting RIP to
DocuColor 12
 
16 ' 4 "
 
 
Electrical Requirements
 
 
MPS
 
Voltage
 
100 to 125 / 200 to 240 VAC RMS,
single phase, automatically
configured
 
Amperage
 
15
 
Cycles (single phase)
 
60 Hz, single phase
 
Xerox Receptacle Part No.
 
600S3704
 
Receptacle NEMA Part No.
 
5-15R
 
Receptacle Diagram
 
 
Power
 
100 W maximum
 
Note:
 
·  Surge protection is required for all MPS (CPU+Monitor)
installations.
·  The power source for the MPS must be continuous and not
interrupted by an on-site power failure.
 
 
Installation Considerations
· 
Electrical requirements and space requirements must be satisfied
prior to equipment delivery.
·  The Deliver / Removal Carrier physically installs the KPG
Matchprint Professional Server IIx. The customer is responsible for
configuring the MPS to the network.
· 
The work surface of the MPS must not infringe on the space
required by the DocuColor 12 and any attached accessories unless
the work surface is a table that has wheels and can be easily
moved.  Refer to the DocuColor 12 Customer Expectations Setting
Document.
 
 
Environmental Requirements
 
 
Min.
 
Max.
 
Operating Temperature
 
 68 
o
 F (10
o
 C)
 
90 
o
 F (40
o
 C)
 
Humidity (non-condensing)
 
5% RH
 
95%  RH
 
Altitude (above sea level)
 
0
 
10,000 ft.
 
(3,048 m)
 
 
Operating Supplies
 
Order supplies from the Xerox Supplies Marketing Center, 1-800-822-
2200.  Supply items for the KPG MPS proofing Solution are 12x18 inch
KPG Matchprint Co-Branded Xerox Color Laser Proofing Papers.
 
Item
 
Reorder #
 
Units per Box
 
Commercial
 
3R12266
 
100 sheets
 
Superwhite
 
3R12267
 
100 sheets
 
Publication
 
3R12271
 
100 sheets