Xerox Xerox 8264E Leaflet

 

Xerox 8264E User Maintenance and Cleaning Guide 

3 

5 

Flushing Box Sponge 

1 box of 5

6 Latex 

Gloves 

10

 

Cleaning 

Weekly and monthly cleaning are necessary to keep the printer in good condition. This 
section describes how to clean each part of the printer. 
 
Twice per Week: 

 

Cleaning the Head 

 

Cleaning the Cleaning Wiper 

 
Weekly: 

 

Cleaning around the Cap 

 

Cleaning around the Print Head 

 
Monthly: 

 

Replacing the Flushing-box Sponges 

 
 

  Never disconnect the printer’s power cable(s) from the building’s electrical outlet 

without first pressing the [Power] key to turn the printer OFF. Doing so can cause 
the printer to misread how much ink is still in the cartridges. It may indicate a 
cartridge is empty when it is not. If this happens, there is no option but to replace 
the cartridge. This can lead to dramatic waste of ink. 

 

  Do not insert or drop metal or flammable objects into the printer through 

openings such as a fresh air inlet. Doing so could lead to an electric shock or fire. 

  If foreign substances or liquids such as water enter the printer, do not use the 

printer. It could lead to an electric shock or fire. Immediately press the [Power] key 
to turn the printer OFF, disconnect the power cables from the electric outlet, and 
contact your local Xerox dealer. 

 

  When cleaning the printer, be sure to first press the [Power] key to turn the printer 

OFF and then disconnect the power cable from the electrical outlet. 

  Do not use volatile solvents such as thinner, benzene, or alcohol. These solvents 

could cause damage to the paint. 

  Be careful that no moisture enters the printer. There is a possibility that the 

electric circuit inside the printer could cause a short circuit. 

 

  Do not, under any circumstances, open covers attached using screws. This may 

cause an electric shock or a malfunction.