Craftsman 115762 Product Datasheet

Ball bearing slides

OPERATOR’S MANUAL

•  The maximum weight for each drawer should be no more than 

100 lbs.

•  The maximum product weight for each model combination, 

including contents, should be no more than 1,500 lbs.

F2073

is used to indicate a hazardous situation which, 

if not avoided, will result in serious injury or death.
WARNING 

indicates a hazardous situation which, 

if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not 
avoided, may result in minor injury, moderate injury, or property 
damage.
CAUTION:  Read and follow all Safety Rules and Operating 
Instructions before assembly and first use of this product.

LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is 
located on a label on the interior right side of the top most drawer.

•   For casters, use high quality bearing grease, (yearly). 
•   Lubricate the slides with grease or equivalent,(twice yearly.) 

•   Lubricate lock with graphite, (yearly). 
•   Periodically the drawer fronts, drawer trim, and other surfaces 
   should be cleaned with a mild detergent and water. 
•   Auto wax will preserve the unit’s luster finish. Apply the wax    
   as to a car. The wax will also help protect the unit against  

 

   scratches. 
•   Grease and oil can be removed with most standard 
   cleaning fluids. For safety, use a nonflammable cleaning fluid. 
•  It is recommended that drawer liners are used to protect the 
   finish inside the drawers and to make the drawers easier to 
   clean. The drawer liners may be cleaned with soap and water.

CALL 1-800-366-7278 FOR SERVICE PARTS. Refer to Service 
Parts Drawing for full listing of Service Parts.

* Product you purchased may vary from picture shown

Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179

DANGER
•      DO NOT stand on this product. You may fall or cause product 

to tip.

•      DO NOT open more than one drawer. The product may be-

come unstable and tip.

•      DO NOT step in the drawers. You may fall or cause product to 

tip.

•      DO NOT mount this product on a truck bed or any other mov-

ing object.

•      DO NOT move the product prior to closing and locking all the 

drawers and chest lid. The drawers could come open and 
make the product unstable and tip.

•      DO NOT place any objects on top of a closed lid.

WARNING
•   WEAR SAFETY GLASSES when removing or repositioning 
   the  slides. 
•   DO NOT pull the unit, push it when moving. Pushing the unit will
   prevent serious ankle and foot injuries.
•   USE THE BRAKES when not moving this product. This will    
   prevent the product from rolling. 
•   DO NOT alter this product in any manner. For example, do not  
   weld external lockbars or attach electrical equipment. 
•   Keep the product on level surfaces. The product may become  
   unstable and tip if stored or moved on an uneven surface. 
•   BE CAREFUL when closing drawers, the cover or doors. 
   Remove hands before the cover closes completely.

CAUTION
•  This product is not designed to be directly lifted with a fork lift, 

or to be towed with any mechanical devices.

•  Do not exceed the maximum weight capacity for each drawer 

or shelf.

•  This product should be empty when transporting by vehicle. 
  Properly secure when transporting. 
•  DO NOT exceed maximum product weight, including contents. 

See Capacities for more information.

• As with all metal products, this product can contain burrs and 
  sharp edges. Wear protective gloves during assembly.
• Use adequate manpower when assembling and moving this 
  unit. Failure to do so may cause personal injury or product 
  damage.