Black & Decker IR05XC, 6XC, 7XC, 8XC Instruction Manual

IMPORTANT SAFEGUARDS.

When using your iron, basic safety precautions should always be followed, 

including the following:

• Only use iron for its intended use.

•  To avoid risk of electric shock, do not immerse the iron in water or other liquids.

•  Always turn iron off before plugging or unplugging from the electrical 

outlet. Never pull on the cord to disconnect the iron from the electrical 

outlet; instead, grasp the plug and pull on the plug to disconnect the iron.

•  Do not let the cord touch hot surfaces. Let the iron cool completely before 

putting the iron away. Coil the cord loosely around the iron when storing.

•  Always disconnect the iron from the electrical outlet before filling the iron 

with water, emptying the water from the iron, and when the iron is not in use.

•  Do not operate the iron with a damaged cord or in the event the iron has 

been dropped or damaged. To avoid the risk of electric shock, do not 

disassemble the iron. Take it to a qualified serviceman for examination and 

repair. Incorrect assembly might result in a risk of electric shock when the 

iron is used after reassembly.

•  Close supervision is necessary for any appliance used by or near children. 

Do not leave the iron unattended while the iron is connected or on an 

ironing board.

•  Burns can occur from touching hot metal parts, hot water or steam. Use 

caution when you turn a steam iron upside down— there might be hot 

water in the reservoir.

•  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience 

and knowledge, unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

•  The iron must be used and rested on a stable surface. 

•  When placing the iron on its stand, ensure that the surface on which the 

stand is placed is stable.

•  The iron is not to be used if it has been dropped, if there are visible signs of 

damage or if it is leaking.

SPECIAL INSTRUCTIONS. 

• To avoid a circuit overload, do not operate an iron on the same circuit with 

another high wattage appliance.

• If an extension cord is absolutely necessary, a cord with an ampere rating 

equal to or greater than the maximum rating of the iron should be used. A 

cord rated for less amperage can result in a risk of fire or electric shock 

due to overheating. Care shall be taken to arrange the cord so that it cannot 

be pulled or be tripped over.

SAVE THESE INSTRUCTIONS.

This appliance has a polarized plug (one blade is wider than the other). To 

reduce the risk of electric shock, this plug is intended to fit into a polarized 

outlet only one way. If the plug does not fit fully into the outlet, reverse the 

plug. If it still does not fit, contact a qualified electrician. Do not attempt to 

modify the plug in any way.

Warning: This appliance is equipped with a tamper-resistant screw to 

prevent removal of the outer cover. To reduce the risk of fire or electric shock, 

do not attempt to remove the outer cover. There are no user-serviceable parts 

inside. Repair should be done only by authorized service personnel.

Note: If the power cord is damaged, it should be replaced by qualified 

personnel; in Latin America, by an authorized service center.

This product is for household use only.

• Remove any labels, stickers or tags attached to the body or soleplate of the iron.

• Please go to www.prodprotect.com/applica to register your warranty.

Note: Use ordinary tap water for ironing. Do not use water processed through a 

home softening system.

1. With iron on flat surface with soleplate down, open  

    water-fill cover (

A).

2. Tilt the iron and using a clean measuring cup, pour  

    water into opened chamber until water reaches the MAX level mark on the side of  

    the water tank. Do not overfill.

3. Close the water-fill cover.

4. Plug in the iron. The power indicator light illuminates.

Note: If you need to add water while ironing, unplug the iron and follow above steps.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) 

before ironing.

The automatic shutoff feature in your iron works as follows:

• Once the iron reaches appropriate temperature, 

it will turn off after 30 seconds of inactivity if left 

on its soleplate or tipped over on its side. If left 

vertically on its heel rest, it will shut off after  

8 minutes (

B). 

•  The power indicator light starts blinking to let you 

know that the iron has stopped heating.

•  As soon as you pick up the iron, it will start heating 

again. Wait for iron to reheat completely before resuming operation.

The Smart Steam

TM

 system automatically produces steam when you turn the 

fabric select dial between settings 4 and 6.

Tip: Use to remove stubborn creases.

1. With the water tank filled to the MAX mark, set fabric select dial to  

    appropriate setting (between 4 and 6) for your fabric. See fabric guide on  

    water tank and read garment’s label to help you determine fabric type.

2. Be sure there is water in the reservoir. Steam is automatically turned off 

between settings 0 and 3.

3. For best performance, use surge of steam at 5-second intervals.

4. When finished ironing, turn the fabric select dial to 0 and unplug the iron.

Tip: Use for removing wrinkles from hanging clothes and drapes.

1. Be sure the water tank is filled to the MAX mark.

2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes  

    can be steamed once they are hung.)

3. Set the fabric select dial to appropriate setting (between 4 and 6) for your fabric.

4. Hold the iron close to, but not touching, the fabric.

5. Pull the fabric tight in your free hand and press the button as you move the  

    iron over the fabric.

Tip: Use to dampen tough wrinkles at any setting.

1.  Be sure the iron is filled with water.

2.  On first use, pump the button several times.

The anti drip system prevents water spotting at low temperatures.

1.  Turn the fabric select dial to setting 1, 2, or 3 to iron without steam.

XPRESS STEAM

™

 IRON 

Product may vary slightly from what is illustrated.

1. Spray nozzle 

2. Water-fill cover 

3. Fabric select dial 

4. Steam button

5. Spray button 

6. Power indicator light 

7. Handle 

  8. 360° pivoting cord 

  9. Slip-resistant heel 

10. Fabric guide 

11. Translucent water tank 

12. Auto Clean

TM

 button 

13. Soleplate

© 2013  Applica Consumer Products, Inc.

is a registered trademark of The Black & Decker Corporation,  

Towson, Maryland, USA

Made and Printed in People’s Republic of China 

USA/Canada 1-800-231-9786

Accessories/Parts 1-800-738-0245

Register your product at www.prodprotect.com/applica

R2 2012/5-15-100 E/F

Model: IR05XC, 6XC, 7XC, 8XC
www.prodprotect.com/applica

2.  To dry iron at higher settings, empty the water from the reservoir to 

    prevent steaming.

1.  Unplug the iron and let it cool.

2.  To release the water, hold the iron over a sink with the tip pointing down  

       and to one side. Water will empty out of the water-fill opening.

This product contains no user serviceable parts. Refer service to qualified service 

personnel.

Make sure iron is unplugged and has cooled completely. Wipe the soleplate 

and outersurfaces with a soft cloth dampened with water. Add mild household 

detergent. Neve ruse abrasives, heavy-duty cleansers, vinegar or scouring 

pads that may scratch or discolor the iron. After cleaning, steam iron over an 

old cloth to remove any residue from the steam vents.

Tip: To keep the steam vents free of any buildup, follow these instructions 

about once a month:

1. Fill the water tank well below the MAX line. Plug in the iron.

2. Turn the fabric select dial to 6 and stand the iron on its heel rest. Allow it to heat.

3. Turn fabric select dial to 0, unplug the iron and hold over a sink with the 

    soleplate facing down.

4. Press and hold the AUTO CLEAN

TM

 button. Be careful, as hot water and steam  

    will come out of the steam vents. Continue to hold the AUTO CLEAN

TM

 button until 

    all the water has emptied. If necessary, rock iron side-to-side and front-to-back.

5. When finished, release the button, stand the iron on its heel rest and plug it  

     in. Heat for about 2 minutes to dry out any remaining water.

1. Unplug the iron and allow it to cool.

2. Check that the selector is set to 0.

3. Store vertically on its heel to prevent water leaking from the soleplate.

For service, repair or any questions regarding your appliance, call the 

appropriate 800 number on the cover of this book.

 Do not return the product 

to the place of purchase. Also, please 

Do not mail product back to the 

manufacturer, nor bring it to a service center. You may also want to consult 

the website listed on the cover of this manual.

• Any defect in material or workmanship provided; however, Applica’s liability 

   will not exceed the purchase price of the product.

• Two years from the date of original purchase with proof of such purchase.

• Provide you with a reasonably similar replacement product that is either 

   new or factory refurbished.

• Save your receipt as proof of date of sale.

• Check our on-line service site at www.prodprotect.com/applica, or call our 

   toll-free number, 1-800-231-9786, for general warranty service.

• If you need parts or accessories, please call 1-800-738-0245.

• Damage from commercial use

• Damage from misuse, abuse or neglect

• Products that have been modified in any way

• Products used or serviced outside the country of purchase

• Glass parts and other accessory items that are packed with the unit

• Shipping and handling costs associated with the replacement of the unit

• Consequential or incidental damages (Please note, however, that some 

   states do not allow the exclusion or limitation of consequential or incidental 

   damages, so this limitation may not apply to you.)

• This warranty gives you specific legal rights, and you may also have other  

   rights that vary from state to state or province to province.

10

11

12

13

8

9

1

2

3

4

5

6

7