Manualsbrain.com
  1. Manuals
  2. Brands
  3. Honeywell
  4. 7-Day Programmable Thermostat (RTH7600D)
  5. Owner's Manual

Honeywell 7-Day Programmable Thermostat (RTH7600D) Owner's Manual

Download
Page of 40
19
Troubleshooting
If you have difficulty with your thermostat, please try the following suggestions.  
Most problems can be corrected quickly and easily.
Display is blank 
• 
Check circuit breaker and reset if necessary.
• 
Make sure power switch at heating & cooling system is on.
• 
Make sure furnace door is closed securely.
• 
Make sure fresh AA alkaline batteries are correctly installed.
Temperature 
settings do not 
change
Make sure heating and cooling temperatures are set to acceptable 
ranges:
• 
Heat: 40° to 90 °F (4.5° to 32 °C).
• 
Cool: 50° to 99 °F (10° to 37 °C).
Heating or 
cooling system 
does not respond
• 
Press 
SYSTEM to set system to Heat. Make sure the temperature 
is set higher than the Inside temperature.
• 
Press 
SYSTEM to set system to Cool. Make sure the temperature 
is set lower than the Inside temperature.
• 
Check circuit breaker and reset if necessary.
• 
Make sure power switch at heating & cooling system is on.
• 
Make sure furnace door is closed securely.
• 
Wait 5 minutes for the system to respond.
Cannot change 
system setting 
to Cool
• 
Check Function 0170: System Type to make sure it is set to 
match your heating and cooling equipment.
Fan does not 
turn on when 
heat is required
• 
Check Function 0180: Heating Fan Control to make sure it is set 
to match your heating equipment.
Heating system 
is running in cool 
mode
• 
Check Function 0170: System Type to make sure it is set to 
match your heating and cooling equipment.
Red light is on
• 
If thermostat is in Emergency Heat mode the red light is normal. 
It shows that the thermostat is in emergency heat mode.
• 
If thermostat is not in Emergency Heat mode, contact a qualified 
service contractor for repair.
“Wait” appears 
on the screen
• 
Compressor protection feature is engaged. Wait 5 minutes for the 
system to restart safely, without damage to the compressor.
Heat pump 
issues cool air 
in heat mode, or 
warm air in cool 
mode
• 
Check Function 0190: Heat Pump Changeover Valve to make 
sure it is properly configured for your system.
For assistance with this product, please visit http://yourhome.honeywell.com or 
call Honeywell Customer Care toll-free at 1-800-468-1502.