Honeywell QuietSet Whole Room Tower Fan - White Owner's Manual

3

• Line up the left and right pedestal assembly and firmly snap

together (Fig. 1).

• Align the two portions of the circular base and snap together by

gently pushing the 4 extrusions (Fig. 2, Item A) into the adjacent

circles of the connecting piece (Fig. 2, Item B).

• Align the 3 screw holes on bottom of pedestal with the 3 holes

in the base such that the power cord holder is at the rear of the

unit . (Fig. 3)

• Secure the base assembly to the pedestal by inserting and

tightening the 3 screws in the 3 holes located on the bottom

of the base (Fig. 4).

• Carefully turn the fan on its side and place on a table. Place

the power cord through the center of the pedestal and base

assembly.

• Align the pedestal with the tower fan so that the one locking

screw hole on the pedestal body is aligned with the rear of

the tower fan unit. Firmly hold the base steady and rotate

the pedestal assembly clockwise to lock the tower fan to the

pedestal assembly (Fig. 5).

• Secure the pedestal to the tower fan by inserting and tightening

1 screw in the opening located near the top rear of the pedestal

assembly (Fig. 6).

• With the fan still on its side, locate the cord holding bracket on

the bottom of the base.

• Gently pull any slack out of the power cord, place the power

cord securely in the holding bracket and secure the power cord

bracket over the power cord (Fig. 7).

• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper,

upright position.

Fig. 1

Pedestal Assembly

Fig. 5

Fig. 7

Fig. 6

Fig. 4

A

B

Extrusions

Fig. 2

Base Assembly

Fig. 3

Positioning

Hole

Positioning

Pole