Zanussi ZOB12401WK User Manual

When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.
The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel frame

on the screen-printing zones is not rough when

you touch it.
Make sure that you install the internal glass

panel in the seats correctly.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Refer to Safety chapters.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The Minute Minder + End of

Cooking programmer is not set.

Set the Minute Minder + End of

Cooking programmer. Refer to

the chapter "Clock functions".

The oven does not heat up.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.