Zanussi ZRX51101WA User Manual

Page of 42
19
 
www.zanussi.com
WARNING!
Refer to Safety chapters.
Positioning
This appliance should be installed in a dry, 
well ventilated indoor climate where the ambi-
ent temperature corresponds to the climate 
class indicated on the rating plate of the 
appliance:
Climate 
class
Ambient temperature
SN
+10ºC to +32ºC
N
+16ºC to +32ºC
ST
+16ºC to +38ºC
T
+16ºC to +43ºC
Some functional problems might occur 
for some types of models when operat-
ing outside of that range. The correct 
operation can only be guaranteed 
within the specified temperaturerange. 
If you have any doubts regarding where 
to install the appliance, please turn to 
the vendor, to our customer service or 
to the nearest Service Centre
 Location
WARNING! 
It must be possible to disconnect the 
appliance from the mains power sup-
ply; the plug must therefore be easily 
accessible after installation.
The appliance should be installed well away 
from sources of heat such as radiators, boil-
ers, direct sunlight etc. Ensure that air can cir-
culate freely around the back of the cabinet. 
To ensure best performance, if the appliance 
is positioned below an overhanging wall unit, 
the minimum distance between the top of 
the cabinet and the wall unit must be at least 
100 mm. 
Closing the door
1.  
Clean the door gaskets.
2.  If necessary, adjust the door. Refer to 
“Installation”.
Installation
3.  If necessary, replace the defectivedoor 
gaskets. Contact the ServiceCenter.