Zanussi ZOD35712XK User Manual

45°

4. Hold the door with one hand on each side

and pull it away from the appliance at an

upwards angle.

5. Put the door with the outer side down on a

soft cloth on a stable surface. This is to

prevent scratches.

6. Hold the door trim (B) on the top edge of

the door at the two sides and push inwards

to release the clip seal.

2

1

Rough handling of the glass,

especially around the edges of the

front panel, can cause the glass to

break.

7. Pull the door trim to the front to remove it.

8. Hold the door glass panels on their top

edge one by one and pull them up out of

the guide.

9. Clean the glass panel with water and soap.

Dry the glass panel carefully.

When the cleaning is completed, install the

glass panels and the door. Do the above steps

in the opposite sequence. Install the smaller

panel first, then the larger.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp. The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp. 

Use the same oven lamp type.

4. Install the glass cover.

Refer to Safety chapters.