Zanussi ZKC44500XA User Manual

The top lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Refer to Safety chapters.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up.

The automatic switch-off is ac-

tivated. 

Refer to "Automatic switch-

off". 

The oven does not heat up.

The Child Lock is on.

Refer to "Using the Child

Lock".

The oven does not heat up.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

It takes too long to cook the

dishes or they cook too quick-

ly.

The temperature is too low or

too high.

Adjust the temperature if nec-

essary. Follow the advice in

the user manual.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

The display shows an error

code that is not in this table. 

There is an electrical fault.

• Deactivate the oven with

the house fuse or the safety

switch in the fuse box and

activate it again.

• If the display shows the er-

ror code again, contact the

Customer Care Depart-

ment.

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.