Zanussi ZRA40113WA User Manual

 

Many food products were put

in at the same time.

Wait some hours and then check

the temperature again.

 

The room temperature is too

high.

Refer to climate class chart on

the rating plate.

 

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before storing.

Water flows inside the refrig-

erator.

The water outlet is clogged.

Clean the water outlet.

Food products prevent that

water flows into the water

collector.

Make sure that food products do

not touch the rear plate.

Water flows on the floor.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water outlet to

the evaporative tray.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The food products' tempera-

ture is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Many food products are stor-

ed at the same time.

Store less food products at the

same time.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

REPLACING THE LAMP
1. Disconnect the plug from the mains socket.

2. Push the movable part of the lamp cover (1) to

unhook it.

3. Remove the lamp cover (2).

4. Replace the bulb with one of the same power

and shape, specifically designed for household

appliances.

5. Install the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door. Make sure that the light

switches on.