Zanussi ZCK68200X User Manual

WARNING! Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply.

You cannot activate the appli-

ance.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The burners do not work.

There is no gas supply.

Check the gas connection.

There is no spark when you try

to activate the spark generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

The display shows "12.00".

There was a power cut.

Reset the clock.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

SERVICE DATA
If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre.
The necessary data for the service centre is on the

rating plate. The rating plate is on the front frame of

the appliance cavity. Do not remove the rating plate

from the appliance cavity.