Zanussi ZGG35214XA User Manual

To replace the connection cable use

only H03V2V2-F T90 or equivalent

type. Make sure that the cable

section is applicable to the voltage

load and the working temperature.

The yellow/green earth wire (B)

must be approximately 2 cm longer

than the live and neutral wire (A).

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the
letter 'E', or the earth symbol  , or

coloured green and yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the letter 'N'

or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the letter 'L'. It

must always be connected to the network

phase. There must be no cut or stray

strands of wire present. The cord clamp

must be correctly attached to the outer

sheath.

30 mm

55 mm

40-50 mm

min. 650 mm

490 mm

min. 100 mm

min. 600 mm

270 mm

50 mm

400 mm

If a furniture unit is installed at a

distance of 400 mm above the

hob, there must be a minimum

safety distance of 50 mm to the

left or right from the edge of the

hob.