Zanussi ZGG35214XA User Manual

lighting and check that the burner crown holes

are not obstructed.

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Refer to Safety chapters.

There is no spark when you try to

activate the spark generator.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

 

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

 

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre. Give the data from the rating

plate. Make sure, you operated the hob

correctly. If not the servicing by a service

technician or dealer will not be free of charge,

also during the warranty period. The instructions

about the Service Centre and conditions of

guarantee are in the guarantee booklet.