Zanussi ZRG16605WA User Manual

When placing the appliance ensure that it

stands level. This can be achieved by two

adjustable feet at the bottom in front.

It must be possible to disconnect

the appliance from the mains power

supply; the plug must therefore be

easily accessible after installation.

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and the

wall unit must be at least 100 mm . Ideally,

however, the appliance should not be

positioned below overhanging wall units.

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet.

min.

100 mm

15 mm

15 mm

Before carrying out any operations,

remove the plug from the power

socket.

To carry out the following

operations, we suggest that this be

made with another person that will

keep a firm hold on the doors of the

appliance during the operations.

1. Unscrew both screws on the rear side.

2. Push back the top and lift it.

3. Unscrew the left foot.

4. Unscrew the screws of the door bottom

hinge. Remove the hinge. Put over the pin in

the direction of the arrow.

5. Unscrew and install the screw on the

opposite side.

6. Install the hinge on the opposite side.

7. Screw the right foot.

8. Unscrew the screws of the door top hinge.

9. Remove the hinge. Put over the pin in the

direction of the arrow. Install the hinge on

the opposite side.