Zanussi ZBA22421SA User Manual

Water flows on the floor.

The melting water outlet is not

connected to the evaporative

tray above the compressor.

Attach the melting water outlet to

the evaporative tray.

The temperature in the appliance

is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The door is not closed correct-

ly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products temperature

decrease to room temperature be-

fore storage.

Many food products are stored

at the same time.

Store less food products at the

same time.

The door has been opened of-

ten.

Open the door only if necessary.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

Disconnect the plug from the mains

socket.

1. At the same time, with the fingers expand

up and down the transparent cover and

unhook it in the direction of the arrows.

2. Replace the lamp with one of the same

power and shape, specifically designed for

household appliances. (the maximum power

is shown on the light bulb cover).

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door. 

Make sure that the light comes on.

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Dimensions of the recess