Zanussi ZWI71401WA User Manual

4. Close the door.

Make sure

that no laun-

dry stays be-

tween the

seal and the

door. There

is a risk of

water leak-

age or dam-

age to the

laundry.

1. Measure out the de-

tergent and the fabric

conditioner.

2. Put the detergent

and the fabric condi-

tioner into the com-

partments.

3. Carefully close the

detergent drawer.

Detergent compartment for pre-

wash phase.
Detergent compartment for

washing phase.
Compartment for liquid additives

(fabric conditioner, starch).

SETTING A PROGRAMME
1. Turn the programme knob to switch the

appliance on and set the programme:

• The indicator of the button Start/Pause

flashes.

• The display shows the programme duration.

2. If necessary, change the temperature and the

spin speed or add available options. When you

activate an option, the indicator of the set

option comes on.

If you set something incorrect, the
display shows the message 

.

1. Press the button Delay Start again and again

until the display shows the delay you want to

set. The delay start indicator comes on.

2. Press the button Start/Pause:

• The door is locked and the indicator Door is

on.

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the Delay Start option before you

press the button Start/Pause. After

pressing the button Start/Pause you

can only cancel the Delay Start option.

To cancel the Delay Start option:

a. Press the button Start/Pause to set the

appliance to pause. The indicator of button

Start/Pause flashes.

b. Press the button Delay Start until the

display shows  .

Press the button Start/Pause again to start

the programme immediately.

DELAY START
Press the button Start/Pause.

• The indicator of the button Start/Pause

stops to flash and stays on.

• The programme starts, the door locks, the

indicator Door is on.

• The programme time decreases with steps

of one minute.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

1. Turn the programme knob to position   to

cancel the programme and to deactivate the

appliance.

2. Turn the programme knob again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.