Zanussi ZWI71401WA User Manual

Page of 24
• Press the catch down-
wards and pull it out to
remove the drawer.
• Flush it out under a
tap, to remove any
traces of accumulated
powder.
• Remove the top part of
the additive compart-
ment to aid cleaning.
• Make sure that all
washing powder resi-
due is removed from
the upper and lower
part of the recess.
• Use a small brush to
clean the recess.
• Replace the drawer and run the rinse
programme without any clothes in the drum.
CLEANING THE DRAIN FILTER
The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during
draining phase due to objects such as safety
pins, coins and so on blocking the pump;
• a problem with water draining is detected (see
chapter 'Troubleshooting' for more details).
CAUTION! Switch the appliance off
and remove the mains plug from the
socket.
Proceed as follows:
• Unplug the appliance.
• If it is necessary, wait until the water has cooled
down.
A
B
• Place a container
close to the pump (A)
to collect any spillage.
• Pull out the emergen-
cy emptying hose (B),
place it in the contain-
er and remove its cap.
• When no more water
comes out, unscrew
the filter.
• Turn the filter anti-
clockwise.
1
2
• Remove the filter.
• Use pliers, if necessa-
ry.
• When removing the
filter, always keep a
rag nearby to dry up
any water spillage.
• Clean the filter under
a tap, to remove any
traces of fluff.
• Remove foreign
bodes and fluff from
the filter seat and from
the pump impeller.
• Check carefully
whether the pump im-
peller rotates (it ro-
tates jerkily).
If it doesn’t rotate, please contact your Service
Centre.
1
2
• Put the cap back on
the emergency empty-
ing hose and place
the latter back in its
seat.
• Replace the filter into
the pump, insert it
correctly into the spe-
cial guides.
• Screw the pump cover firmly. Turn it clockwise.
CAUTION! When the appliance is in
use and depending on the set
programme there can be hot water in
the pump.
15