Zanussi ZDC8203WR User Manual

BUZZER ON/OFF
To deactivate or activate the acoustic signals, press

and hold for approximately 2 seconds touchpads

(B) and (C) at the same time.

MOISTURE DEGREE
To change the default degree of the remaining

moisture of the laundry:
1. Press the on/off button to activate the

appliance.

2. Wait approximately 8 seconds.

3. Press and hold buttons (B) and (D) at the same

time.

One of the these indicators comes on:

•

 the maximum dry laundry

•

 the more dry laundry

•

 the standard dry laundry

4. Press the button (F) again and again until the

indicator of the correct level comes on.

5. To confirm the adjustment, press and hold

buttons (B) and (D) at the same time for

approximately 2 seconds.

Before you use the appliance for the first time do

these operations:
• Clean the tumble dryer drum with a moist cloth.

• Start a short programme (e.g. 30 minutes) with

moist laundry.

START
1. Prepare the laundry and load the appliance. 

CAUTION! Make sure that when

you close the door, the laundry

does not catch between the

appliance door and the rubber

seal.

2. Press the on/off button to activate the

appliance.

3. Set the correct programme and options for the

type of load.

The display shows the programme duration.

4. Press the Start/Pause touchpad.
The programme starts.

START
1. Set the correct programme and options for the

type of load.

2. Press the delay start button again and again

until the display shows the delay time you want

to set. 

You can delay the start of a

programme from a minimum of 60

minutes to a maximum of 20

hours.

3. Press the Start/Pause touchpad.

The display shows the countdown of the delay

start.
When the countdown is completed, the programme

starts.

CHANGE A PROGRAMME
1. Press the on/off button to deactivate appliance

2. Press the on/off button to activate the

appliance.

3. Set the programme.

AT THE END OF THE PROGRAMME
When the programme is completed:
• An intermittent acoustic signal operates.
• The indicator   flashes.
• The indicators   Filter and 

 Tank comes on.

• The Start/Pause indicator is on.
The appliance continues to operate with the crease

guard phase for approximately other 30 minutes.
The crease guard phase removes creases from

your laundry.
You can remove the laundry before the crease

guard phase is completed. We recommend, for

better results, that you remove the laundry when the

phase is almost completed or completed.
When the crease guard phase is completed:
• The indicator   is on but does not flash.
• The indicators   Filter and 

 Tank comes on.