Zanussi ZDP7202PZ User Manual

You can remove the laundry before the crease

guard phase is completed. We recommend, for

better results, that you remove the laundry when the

phase is almost completed or completed.
When the crease guard phase is completed:
• The indicators Filter and Tank comes on.

• Start/Pause indicator goes off.
1. Press the on/off button to deactivate the

appliance.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

Always clean the filter and empty the

water container when a programme is

completed.

STAND-BY FUNCTION
To decrease the energy consumption, this function

automatically deactivates the appliance:
• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the programme.

PREPARING THE LAUNDRY
• Close the zippers.

• Close the fasteners of the duvet covers.

• Do not keep ties or ribbons loose (e.g. apron

ribbons). Tie them before you start a

programme.

• Remove all items from the pockets.

• If an item has the internal layer made of cotton,

turn it inside out. Make sure that the cotton layer

is always external

• We recommend that you set the correct

programme applicable for the type of fabrics

that are in the appliance.

• Do not put fabrics with strong colours together

with fabrics with light colours. Strong colours

can bleed.

• Use an applicable programme for cotton jersey

and knitwear to prevent the items to shrink.

• Make sure that the laundry weight is not more

than the maximum weight that is in the

programme table.

• Dry only the laundry that is applicable for tumble

dryer. Refer to the fabric label on the items.

Laundry that is applicable for tumble dryer.

Laundry that is applicable for tumble dryer. Set the programme with standard

temperature.
Laundry that is applicable for tumble dryer. Set the programme with low tempera-

ture.
Laundry that is not applicable for tumble dryer.