Vitek VT 1480 GY User Manual
4
ENGLISH
–
unplug the unit immediately, and only then
take it out of water;
take it out of water;
–
apply to the authorized service center for
testing or repairing the unit.
testing or repairing the unit.
•
For children safety do not leave polyethylene
bags, used as a packaging, unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
bags, used as a packaging, unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
•
Do not allow children to use the unit as a toy.
•
Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
dren or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by children
or disabled persons unless they are given all
the necessary instructions by a person who
is responsible for their safety on safety mea-
sures and information about danger that can
be caused by improper usage of the unit.
or disabled persons unless they are given all
the necessary instructions by a person who
is responsible for their safety on safety mea-
sures and information about danger that can
be caused by improper usage of the unit.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
USAGE ONLY
Before using the unit
Note: In case of unit transportation or storage
at low temperature it is necessary to keep it for
at least two hours at room temperature before
switching on.
Note: In case of unit transportation or storage
at low temperature it is necessary to keep it for
at least two hours at room temperature before
switching on.
–
Wash the attachments that will contact prod-
ucts with warm water and a neutral detergent
and dry them thoroughly before use.
ucts with warm water and a neutral detergent
and dry them thoroughly before use.
–
Wipe the motor unit (4), whisk gear (6), chop-
per (10) and processing bowl (15) geared lids
with a soft slightly damp cloth.
per (10) and processing bowl (15) geared lids
with a soft slightly damp cloth.
Attention!
–
Do not immerse the motor unit (4), whisk
gear (6), mash making attachment gear (8),
chopper geared lid (10), processing bowl
geared lid (15), power cord and power plug
into water or any other liquids.
gear (6), mash making attachment gear (8),
chopper geared lid (10), processing bowl
geared lid (15), power cord and power plug
into water or any other liquids.
–
Do not put the attachments and bowls in a
dish washing machine.
dish washing machine.
Operation time
Continuous operation time with attachments (5,
7, 9) should not exceed 1 minute. Operation time
with the chopper or processor should not exceed
20-30 seconds. Make at least a two-minute
interval between operation cycles.
Continuous operation time with attachments (5,
7, 9) should not exceed 1 minute. Operation time
with the chopper or processor should not exceed
20-30 seconds. Make at least a two-minute
interval between operation cycles.
USING THE BLENDER ATTACHMENT
Warning: Before assembling make sure that
the power plug is not inserted into the socket.
Warning: Before assembling make sure that
the power plug is not inserted into the socket.
•
Insert the blender attachment (5) into the
motor unit (4), and turn it counterclockwise
until bumping.
motor unit (4), and turn it counterclockwise
until bumping.
•
Insert the plug into the socket.
•
Immerse the blender attachment (5) into the
bowl with products that you want to chop/
mix; you can use the measuring cup (29)
for it.
bowl with products that you want to chop/
mix; you can use the measuring cup (29)
for it.
Note: When using the measuring cup (29) for
chopping/mixing the products the amount
of ingredients should not exceed 200 ml.
Otherwise the mixed products can splash.
chopping/mixing the products the amount
of ingredients should not exceed 200 ml.
Otherwise the mixed products can splash.
•
To switch the blender on press and hold the
button (2). Set the required operation speed
1-20 using the control (1). Use this operation
mode for mixing liquid products.
button (2). Set the required operation speed
1-20 using the control (1). Use this operation
mode for mixing liquid products.
•
If you press and hold the button (3), the unit
will switch on at maximum rotation. Use this
operation mode for combined processing of
liquid and hard products.
will switch on at maximum rotation. Use this
operation mode for combined processing of
liquid and hard products.
Note:
–
Products should be put into the bowl before
switching the unit on.
switching the unit on.
–
Before starting to chop/mix, we recommend
to peel fruit, remove inedible parts, such as
bones, and cut fruit into 2х2 cm cubes.
to peel fruit, remove inedible parts, such as
bones, and cut fruit into 2х2 cm cubes.
•
After you finish using the unit, take the plug
out of the socket and remove the blender
attachment (5) by turning it clockwise.
out of the socket and remove the blender
attachment (5) by turning it clockwise.
Attention!
–
Do not remove the blender attachment (5)
during blender operation.
during blender operation.
–
In order not to damage the blades, do not
process too hard products such as cereals,
rice, spices, coffee beans, ice, cheese, fro-
zen food.
process too hard products such as cereals,
rice, spices, coffee beans, ice, cheese, fro-
zen food.
–
If the products are difficult to process, add
some liquid into the bowl.
some liquid into the bowl.
Using the whisk
Use the whisk attachment (7) to make cream,
biscuit dough or to mix ready desserts only.
WARNING: Before assembling make sure that
the power plug is not inserted into the socket.
Use the whisk attachment (7) to make cream,
biscuit dough or to mix ready desserts only.
WARNING: Before assembling make sure that
the power plug is not inserted into the socket.
•
Insert the whisk (7) into the gear (6).
VT-1480.indd 4
02.08.2012 15:15:40