Zelmer ZJE 1205 W/JE 1200.5 WHITE User Manual
108
JE1200-002_v03
Preparing the appliance for operation
Before the first use of installed blender (or after storage for
a longer period of time), clean the food processor elements
(the pusher, the cover, the container, the blade and double-
sided disc) with hot water plus dishwashing detergent, rinse
well and dry these elements.
Maintenance and operation
1
Install the gear on the base for accessories, so that the
symbol on the gear is aligned with the symbol
on
the base for accessories, and then lock the gear by turning
it clockwise to clockwise until it blocks; the symbol
on the gear is aligned with the symbol on the base for
on the gear is aligned with the symbol on the base for
accessories (the characteristic “click” indicates that the gear
is properly installed).
2
Fit the food processor container on the base for
accessories, so that the symbol on the container is
aligned with the symbol
aligned with the symbol
on the base for accessories.
Then press the container to the base for the accessories and
lock it by turning clockwise until the lock; the symbol on
the container is aligned with the symbol on the base for
the container is aligned with the symbol on the base for
accessories (the characteristic “click” indicates that the food
processor container is properly fitted).
The food processor container holder should be
placed on the right side of the appliance.
WORKING WITH THE BLENDER’S BLADE
1
Insert the food processor blade into container.
Place the food in the container.
●
2
Place the food processor cover so that the pin on the
cover hit the hole in the blade and the symbol on the
cover is aligned with the symbol
cover is aligned with the symbol
on the container of
food processor.
3
Tighten the food processor cover to the container’s
flange and lock it by turning clockwise until the symbol on
the cover is aligned with the symbol on the container.
the cover is aligned with the symbol on the container.
Insert the food processor pusher to the hopper of food
●
processor.
Turn on the appliance by turning the control knob to the
●
desired position.
Do not use appliance with installed food
processor in continuous operation for more
than 30 seconds. After this time, turn it off and
wait 10 minutes before restarting, allowing the
engine to cool down.
4
While running the appliance you can add products
(spices, ingredients etc.) through the hopper after removing
the food processor pusher. Put the products into hopper of
the cover and if there is a need - gently press them with
pusher.
I
K
Do not push products with your fingers or other
objects.
To stop the appliance, turn the speed control knob to
●
“0”.
Open the food processor (blender) in a manner opposite
●
to that described in paragraphs
3
and
2
.
WORKING WITH DOUBLE-SIDED DISC
1
Insert the double-sided disc to the food processor
container applying the side suitable for use (slices / chips).
2
Place the food processor cover so that the pin on the
cover hit the hole in the blade and the symbol on the
cover is aligned with the symbol
cover is aligned with the symbol
on the container of
food processor.
3
Tighten the food processor cover to container flange and
lock it by turning clockwise until the symbol on the cover
is aligned with the symbol on the container.
is aligned with the symbol on the container.
4
Insert the products into food processor hopper and -
if possible - insert the food processor pusher.
5
Turn on the appliance by turning the control knob to the
desired position.
Do not use the appliance with installed food
processor in continuous operation for more
than 30 seconds. After this time, turn it off and
wait 10 minutes before restarting, allowing the
engine to cool down.
During operation, add the products through the hopper
●
after removing the food processor pusher. Put the fruit or
vegetables into the hopper of the cover and lightly press
them with pusher.
Do not push products with your fingers or other
objects.
6
To stop the appliance, turn the speed control knob to “0”.
Open the food processor (blender) in a manner opposite
●
to that described in paragraphs
3
and
2
.
Operational guidelines
Do not crush too large pieces with the food processor
●
blade. Before loading the container mill (crush) large
products in order to obtain chunks of approximately
3 cm.
When grinding cheese, butter or margarine do not allow
●
for too long operation. Processed food may become hot
and dissolve.
If the product stick to the blade or to the inner walls of the
●
container, turn off the appliance, remove the cover and
grab the products from blade and container walls.
Double-sided disc – a side applicable to making
slices
You can get regular slices without a scrap when the
●
appliance is disabled during filling the hopper. You can
either use the “PULSE” to this end.
J