Bosch TCA 5309 User Manual
19
TCA53 03/2012
en
Starting the service programme
The appliance must be ready for use.
● Empty and replace the trays
17 and 18.
● Press and hold the buttons
4
F
and
5
h
for at least 5 seconds.
The
S
LED starts to flash and the appliance
rinses the coffee dispenser through
twice.
● Empty and reinsert the grounds tray
17.
The LEDs for button
h
and
H
“Add water”
light up.
● Place one cleaning tablet in the duct
13.
● Fill the water tank with lukewarm water,
add descaling agent and dissolve com
pletely (total liquid 0,5 litres)
or
pour prepared descaling mixture into the
water tank (total liquid 0,5 litres).
● Press the steam button
h
. The descaling
process begins. Duration approx. 10 min
utes. The descaling solution flows into the
water tray
18.
The
J
LED lights up.
● Place a suitable container (approx.
0,5 litres) under the nozzle
8.
● Set the dial
6 to
g
/
h
. The descaling
process begins. Duration approx. 5 min
utes. The descaling solution flows into the
container.
The
I
LED lights up.
● Empty and reinsert the grounds tray
17.
The steam button LED
h
lights up.
● Empty and clean the water tank
11, fill
with fresh water up to the “max” mark and
reinsert.
● Place a suitable container (approx.
0,5 litres) under the nozzle
8.
● Press the steam button
h
. The clean
ing process begins. Water flows into the
container.
The
J
LED flashes.
● Turn the dial
6 to “O”. The cleaning proc
ess begins. Duration approx. 10 minutes.
Liquid flows into the coffee grounds tray
17 inside the appliance, then out through
the coffee outlet.
The
I
LED lights up.
● Empty, clean and reinsert the trays
17
and
18.
The appliance starts to heat up and is
ready for use once the LEDs for dispensing
buttons
3
E
and
4
F
light up.
Important: If the service programme is
interrupted, e.g. due to a power cut,
it is
vital that the appliance be rinsed before it is
used again.
The appliance must be ready for use.
The
â
and steam button
h
LEDs flash.
● Rinse the water tank
11 thoroughly and fill
with fresh water.
● Press the steam button
h
. The appliance
is rinsed and liquid flows into the tray.
The
J
LED lights up.
● Hold a cup under the nozzle
8 and turn
the dial
6 to
g
/
h
. Water runs into the
cup.
The
J
LED flashes.
● Turn the dial
6 back to “O”.
The appliance rinses and is ready for use
again.