Panasonic WV-CF4S WV-CF4SE Leaflet

Smoke Dome Cover 

Embedded Ceiling Mount Bracket  

• CD-ROM* ...................................... 1 pc.

• Installation Guide (English version)  .... 1 pc.

The followings are for the installation.

• Power cord plug  ........................... 1 pc.

• External I/O terminals plug  .......... 1 pc.

• Code Label ................................... 1 pc.

• Camera mount bracket ................. 1 pc.

• Camera fixing screw (M3 x 6)

   ................... 2 pcs. (incl. a spare screw)

• Dome cover fixing screw

  (tapping screw, nominal diameter: ø2.6 mm)

   ................... 2 pcs. (incl. a spare screw)

• Monitor output (3.5 mm mini jack) -

  BNC conversion cable  .................. 1 pc.

• Cable tie ........... 2 pcs.(incl. a spare tie)

* Panasonic IP setting software, the viewer 
  software and the operating instructions (PDF) 
  are included on the CD-ROM.

• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• MPEG-4 and JPEG dual stream output for simultaneous real time 

monitoring and high resolution recording 

• Progressive output provides clear images, even when the subject is moving.
• High sensitivity: 1.5 lux at F1.3 (Wide)
• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF
• Electronic shutter for anti flicker
• 2.8 ~ 10 mm, 3.6x Varifocal Auto Iris lens
• VMD (Video Motion Detector) with 4 programmable detection areas 

and 6 sensitivity levels  

• Meta data for VMD is supplied to work with the WJ-ND400 playback 

VMD function.

• Monitor output for easier installation
• Up to 3x digital zoom controlled by browser
• Camera title display: Up to 20 alphanumeric characters on browser
• SD Memory card slot for alarm recording and backup upon network 

failure. Recorded data can be downloaded by using FTP command.

• Alarm sources including Terminal input, VMD and Panasonic alarm 

command can trigger actions including SD memory recording/FTP 
image transfer, E-mail notification, Alarm indication, Terminal output 
and Panasonic protocol output.

• Built-in microphone for audio (1-way)
• Built-in network interface (10Base-T / 100Base-TX)
• Power over Ethernet (PoE) IEEE 802.3af.
• Multiscreen: Images from 8 cameras can be displayed in 2 separate Quad 

screens (JPEG only). 20 characters camera title is available for each camera.

• FTP client function enables periodic image data transfer or transfer 

upon alarm.

• Alarm e-mail notification

• Max. bit rate/client (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 

4,096 kbps) or frame rate priority mode (4,096 kbps / Unlimited) for MPEG-4 
and Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / 
Unlimited) allowing flexible network management.

• Supported Protocol: TCP/IP, UDP/IP, HTTP, RTSP, RTP, 

RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP

• Internet mode: MPEG-4 images can be transmitted over HTTP protocol.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German, 

Russian (PAL) / English, French (NTSC)    

* Installation required except for English