Redmond RS-710 Black User Manual
7
ENGLISH
Instruction for use
In the open air.
●
there is a danger of a failure of the appliance due to raining
or other weather conditions.
A mobile phone may create interference, which may lead to inaccurate results
●
of weighing.
Keep turned-on mobile phone at a distance of at least 2 metres from the
●
scales or turn the mobile phone off.
It is prohibited to use the appliance in case of any faults.
●
The manufacturer shall not be liable for any damages caused by non-compliance with the
●
safety requirements and operating rules.
PRIoR to tHE fIRSt USE
take out the appliance from the box carefully, remove all packing materials including
1.
advertising stickers.
Wipe the appliance body with moist cloth and dry it.
2.
Check whether the batteries are connected properly; please refer to the section
3.
“Operation of the scales”.
II. oPERatING INStRUctIoNS
Before using, make sure that the batteries are installed.
1.
Remove the covers of the battery compartments (5 and 7) and make sure that the
2.
batteries are installed properly.
If there are no batteries, install them.
3.
NotE: when installing the battery, your hands and the device must be dry.
Connect the batteries to the connectors observing the polarity.
4.
After installation, close the covers of the compartments (5 and 7).
5.
using the switch of
6.
measuring (6), select the required unit.
place the scales on an even, hard horizontal surface.
7.
Step on the scales platforms (1) with both feet. The display (2) will show your weight.
8.
on completion of weighing, step off the scales platforms. the scales will turn off
9.
automatically.
NotE! to obtain the accurate value of your weight, a number of conditions must be met:
1. Step on the scales platforms smoothly.
2. do not shift the center of gravity from one feet to another.
3. during weighing, avoid sharp movements and swaying.
5
6
7