Beko GNE 134620 X User Manual

Page of 111
EN
12
B
 The connection must be in 
compliance with national regulations.
B
 The power cable plug must be easily 
accessible after installation.
B
 Voltage and allowable fuse protection 
are specified in the “Technical 
Specifications” section.
B
The specified voltage must be equal 
to your mains voltage.
B
 Extension cables and multiway plugs 
must not be used for connection.
B
 A damaged power cable must be 
replaced by a qualified electrician.
B
 The appliance must not be operated 
before it is repaired! There is danger 
of electric shock!
Disposing of the packaging
A
  The packing materials may be 
dangerous for children. Keep the 
packing materials out of the reach 
of children or dispose them of by 
classifying them in accordance 
with the waste instructions. Do not 
dispose them of along with the 
normal household waste.
The packing of your refrigerator is 
produced from recyclable materials.
Disposing of your old 
refrigerator
Dispose of your old machine without 
giving any harm to the environment.
A
 You may consult your authorized 
dealer or waste collection center of 
your municipality about the disposal 
of your refrigerator.
A
 Before disposing of your refrigerator, 
cut out the electric plug and, if there 
are any locks on the door, make them 
inoperable in order to protect children 
against any danger.
Placing and Installation
B
 Caution: Never plug the refrigerator 
into the wall outlet during installation. 
Otherwise, risk of death or serious 
injury may arise.
A
 If the entrance door of the room 
where the refrigerator will be installed is 
not wide enough for the refrigerator to 
pass through, than call the authorised 
service to have them remove the 
doors of your refrigerator and pass it 
sideways through the door. 
1. Install your refrigerator to a place 
that allows ease of use.
2. Keep your refrigerator away from 
heat sources, humid places and direct 
sunlight.
3. There must be appropriate air 
ventilation around your refrigerator in 
order to achieve an efficient operation. 
Changing the illumination 
lamp 
To change the Bulb/LED used for 
illumination of your refrigerator, call 
your Authorized Service.
The lamp(s) used in this appliance 
is not suitable for household room 
illumination. The intended purpose of 
this lamp is  to assist the user to place 
foodstuffs in the refrigerator/freezer in 
a safe and comfortable way.