Beko GNE 134620 X User Manual

EN

13

If the refrigerator is to be placed in a 
recess in the wall, there must be at 
least 5 cm distance with the ceiling 
and at least 5 cm with the wall.
If the floor is covered with a carpet, 
your product must be elevated 2.5 cm 
from the floor.
4. Place your refrigerator on an even 
floor surface to prevent jolts.
5. Do not keep your refrigerator in 
ambient temperatures under 10°C.

A

If your refrigerator is unbalanced;

B

 First unplug the product. The 

product must be unplugged when 
making the balance adjustment. There 
is the risk of electric shock.

1- Ventilation cover is removed by 
unscrewing its screws as illustrated 
in the figure before the procedure. 
You can balance your refrigerator by 
turning the front legs of it as illustrated 
in the figure. The corner where the 
leg exists is lowered when you turn 
in the direction of black arrow and 
raised when you turn in the opposite 
direction. Taking help from someone to 
slightly lift the refrigerator will facilitate 
this process.

2. After the balance issue is remedied, 
install back the ventilation cover and 
fasten the screws. 

3. Remove the screws fastening the 
lower ventilation cover using a Philips 
screwdriver. 

C

 You can adjust the gap between 

the fridge compartment doors as 
illustrated in the figures.
Door shelves should be empty when 
adjusting the door height.