AL-KO SnowLine 560 II 112 933 User Manual
GB
27
469186_c
Snow Line 560 II, 620 II, 620E II
Safety
Warning!
Never leave the engine running in an enclosed
space. Risk of poisoning!
space. Risk of poisoning!
Store petrol and oil only in appropriate containers.
$OORZWKHPDFKLQHWRFRROEHIRUHVWRULQJLWLQDQ
enclosed space.
,IWKHUHLVVWLOOSHWUROLQWKHWDQNPDNHVXUHWKDW
there is no ignition source in the enclosed space,
such as a heater or clothes dryer.
such as a heater or clothes dryer.
$GGRUHPSW\SHWURODQGRLOLQDQRSHQVSDFHRQO\
when the engine is switched off and cold.
'RQRWRYHU¿OOWKHWDQNSHWUROH[SDQGV
'RQRWVPRNHZKLOH¿OOLQJWKHWDQN
Do not open the tank cap while the engine is run-
ning or hot.
5HSODFHWKHWDQNRUFDSLIGDPDJHG
Always secure the tank cap securely.
If petrol has spilled out:
Do not start the engine
'RQRWDWWHPSWLJQLWLRQ
Collect spilled petrol with a binding agent or
cloth and dispose of appropriately.
cloth and dispose of appropriately.
&OHDQWKHPDFKLQH
If engine oil has spilled out:
Do not start the engine
Collect spilled petrol with an oil binding agent
or cloth and dispose of appropriately.
or cloth and dispose of appropriately.
&OHDQWKHPDFKLQH
When disposing of used oil:
ƒ do not throw into the rubbish
ƒ do not pour into sewers or drains or onto the
ground
:HUHFRPPHQGUHWXUQLQJXVHGRLOLQDFORVHGFRQWDLQHU
to a recycling facility or service centre.
to a recycling facility or service centre.
Adding engine oil
1.
5HPRYHWKHRLOFDS 22 -1) and store in a clean
area.
area.
2. Add oil using a funnel.
3. Check the oil level.
4. Replace the oil cap tightly and clean.
6HHWKHHQJLQHPDQXDOIRULQIRUPDWLRQDERXWFKHFNLQJ
the oil level.
3. Check the oil level.
4. Replace the oil cap tightly and clean.
6HHWKHHQJLQHPDQXDOIRULQIRUPDWLRQDERXWFKHFNLQJ
the oil level.
Adding petrol
1.
5HPRYHWKHWDQNFDS 22 -2) and store in a
clean area.
clean area.
2. Add petrol using a funnel.
3. Replace the tank cap tightly and clean.
3. Replace the tank cap tightly and clean.
Getting ready for operation
Caution!
'RQRWRSHUDWHDGDPDJHGPDFKLQH
3HUIRUPDYLVXDOLQVSHFWLRQEHIRUHXVLQJ
'RQRWRSHUDWHDGDPDJHGPDFKLQH
3HUIRUPDYLVXDOLQVSHFWLRQEHIRUHXVLQJ
7KHFDPHUDV\PERORQWKHIROORZLQJSDJHVUHIHU-
ences the illustrations on pages 4–7.
ences the illustrations on pages 4–7.
Adjusting the clearance height
Danger - risk of injury!
Adjust the clearance height only if the engine
LVVZLWFKHGRIIDQGWKHDXJHULVQRWLQPRWLRQ
ƒ Adjust the clearance height to avoid taking
in gravel or other objects.
ƒ Look out for uneven places such as ruts,
PDQKROHFRYHUVRUSDYLQJVWRQHV
1.
3ODFHWKHPDFKLQHRQDQOHYHOVXUIDFH
2.
/RRVHQWKHOHIWDQGULJKWVNLGSODWHFODPSLQJVFUHZV
(
(
23-1).
3. Raise the clearing plate to the desired height and
attach the skid plates. Make sure that both skid
plates are spaced equally so that the clearing plate
runs parallel to the ground (
plates are spaced equally so that the clearing plate
runs parallel to the ground (
23-2).