Cisco Cisco Clean Access 3.5
4-25
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
Add Port Profile
You will need to add a Port profile for each set of Auth/Access VLANs you configure on the switch.
1.
Go to Switch Management > Profiles > Port > New.
Figure 4-16
Port Profile (3.5.9+)
2.
Type a single word for the Profile Name. You can use digits and underscores, but no spaces. The
name should reflect whether the Port profile is controlled or uncontrolled.
name should reflect whether the Port profile is controlled or uncontrolled.
3.
Type an optional Description for the Port profile.
4.
Click the checkbox for Manage this port to enable configuration of this Port Profile.
(Note: For 3.5(8) and below, this control is a radio button.)
5.
Type the Auth VLAN to be used for this port profile.
(Note: For 3.5(8) and below this is “Default Auth VLAN.”)
6.
Type the Default Access VLAN to be used for this port profile.
7.
From the Access VLAN dropdown menu, choose one of the following options:
–
Default Access VLAN — The CAM will put authenticated users with certified devices on the
Default Access VLAN specified in the Port Profile.
Default Access VLAN specified in the Port Profile.