Cisco Cisco Clean Access 3.5
4-31
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
Add New Switch
The New page allows you to add switches when exact IP addresses are already known.
1.
Go to Switch Management > Devices > Switches> New.
Figure 4-20
Add New Switch
2.
Choose the Switch Profile from the dropdown menu to apply to the switches to be added.
3.
Choose the Switch Group for the switches from the dropdown menu.
4.
Choose the Default Port Profile from the dropdown menu. Typically, the default port profile should
be uncontrolled.
be uncontrolled.
5.
Type the IP Addresses of the switch(es) you want to add. Separate each IP address by line.
6.
Enter an optional Description of the new switch.
7.
Click the Add button to add the switch.
8.
Click the Reset button to reset the form.