Cisco Cisco Expressway Maintenance Manual
Field
Description
Subzone name
The names of each subzone currently configured on this Expressway.
Clicking on a Subzone name takes you to the configuration page for that subzone.
Clicking on a Subzone name takes you to the configuration page for that subzone.
Calls
The number of calls currently passing through the subzone.
Bandwidth used
The total amount of bandwidth used by all calls passing through the subzone.
Zone Status
The Zone status page (Status > Zones) lists all of the external zones on the Expressway. It shows the number of calls
and amount of bandwidth being used by each zone.
and amount of bandwidth being used by each zone.
The list of zones always includes the Default Zone, plus any other zones that have been created.
The following information is displayed:
Field
Description
Name
The names of each zone currently configured on this Expressway.
Clicking on a zone Name takes you to the configuration page for that zone.
Type
The type of zone.
Calls
The number of calls currently passing out to or received in from each zone.
Bandwidth
used
used
The total amount of bandwidth used by all calls passing out to or received in from each zone.
H.323 / SIP
status
status
Indicates the zone's H.323 or SIP connection status:
■
Off: the protocol is disabled at either the zone or system level
■
Active: the protocol is enabled for that zone and it has at least one active connection; if
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
■
On: applies to DNS and ENUM zones only and indicates that the protocol is enabled for that
zone
zone
■
Failed: the protocol is enabled for that zone but its connection has failed
■
Checking: the protocol is enabled for that zone and the system is currently trying to establish a
connection
connection
Search
rule status
rule status
This area is used to indicate if that zone is not a target of any search rules.
Bandwidth
Link Status
The Link status page (Status > Bandwidth > Links) lists all of the links currently configured on the Expressway, along
with the number of calls and the bandwidth being used by each link.
with the number of calls and the bandwidth being used by each link.
The following information is displayed:
226
Cisco Expressway Administrator Guide