Cisco Cisco PVC300 Pan Tilt Optical Zoom Internet Camera Maintenance Manual

Camera Usage Notes

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE

11

There is an indented reset button on the back panel of the PVC300 PTZ Internet 
Camera. It is used to reboot the PVC300 PTZ Internet Camera or restore it to the 
factory default. Sometimes rebooting the PVC300 PTZ Internet Camera can set it 
back to normal state. If the problems remain after rebooting, restore the factory 
default and install again.

Reboot—Press and release the indented reset button with a paper clip. Wait for 
the PVC300 PTZ Internet Camera to reboot.

Restore—Press the indented reset button continuously for around 30 seconds 
until the status LED rapidly blinks amber and green simultaneously. Note that all 
settings will be restored to factory default.

The use of surveillance devices may be prohibited by law in your country. It is your 
responsibility to ensure that the operation of such devices is legal before installing 
this unit for its intended use. It is important to first verify that all contents received 
are complete as listed in the Quick Start Guide.

Carefully read and follow the instructions in 

 to 

avoid damages due to faulty assembly and installation. This also ensures the 
product is used properly as intended.