Cisco Cisco Token Ring Port Adapters Installation Guide
Corporate Headquarters:
Copyright © 1996–2002. Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
PA-4R Half-Duplex Token Ring Port Adapter
Installation and Configuration
Installation and Configuration
Product Numbers: PA-4R and PA-4R=
This configuration note describes the installation and configuration of the half-duplex PA-4R(=) Token
Ring port adapter, which can be used in the following supported platforms:
Ring port adapter, which can be used in the following supported platforms:
•
Cisco 7200 series routers,, which consists of the 2-slot Cisco 7202, 4-slot Cisco 7204, and the 6-slot
Cisco 7206
Cisco 7206
•
Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and Cisco
7000 series routers. (Refer to the section “
7000 series routers. (Refer to the section “
” on page 2.)
Note
For VIP2 users, use this configuration note in conjunction with the configuration note
Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (Document
Number 78-2658-xx), which shipped with your VIP2.
Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (Document
Number 78-2658-xx), which shipped with your VIP2.
For Cisco 7200 series router users, use this configuration note in conjunction with the Cisco 72xx
Installation and Configuration Guide that shipped with your Cisco 7200 series router.
Installation and Configuration Guide that shipped with your Cisco 7200 series router.
Contents
This configuration note is organized into the following sections:
•
•
•
•
•
•
•