Cisco Cisco Expressway
3. Configure the fields as follows:
Expressway-C
Expressway-E
Name
Not applicable
Enter exampleauth
Password
Not applicable
Enter ex4mpl3.c0m
4. Click Create credential.
Configuring traversal zones for Unified Communications
To support Unified Communications features such as mobile and remote access or Jabber Guest, there must
be a secure traversal zone connection between the Expressway-C and the Expressway-E:
be a secure traversal zone connection between the Expressway-C and the Expressway-E:
n
The traversal client zone and the traversal server zone must be configured to use SIP TLS with TLS verify
mode set to On, and Media encryption mode must be Force encrypted.
mode set to On, and Media encryption mode must be Force encrypted.
n
Both Expressways must trust each other's server certificate. As each Expressway acts both as a client
and as a server you must ensure that each Expressway’s certificate is valid both as a client and as a
server.
and as a server you must ensure that each Expressway’s certificate is valid both as a client and as a
server.
n
If a H.323 or a non-encrypted connection is required, a separate pair of traversal zones must be configured.
Task 8: Configuring traversal zone search rules
To create the search rules to route calls via the traversal zone.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
Cisco Expressway Basic Configuration Deployment Guide
Page 19 of 57
Routing configuration