Cisco Cisco 2106 Wireless LAN Controller Release Notes
3
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 6.0.199.4
OL-31336-01
Controller Requirements
•
Catalyst 3750G Wireless LAN Controller Switches
•
Cisco 3201 Wireless Mobile Interface Card (WMIC)
•
Cisco Aironet 1130AG, 1240AG, 1522, and 1524 Mesh Access Points
Note
This release does not support Cisco Aironet 1505 and 1510 access points.
•
Cisco Aironet 1100, 1130, 1140, 1200, 1230AG, 1240, 1250, 1300, and AP801 Series Lightweight
Access Points
Access Points
Note
Controller software release 5.0.148.0 or later releases is not compatible with Cisco Aironet
1000 series access points.
1000 series access points.
Note
The AP801 is an integrated access point on the Cisco 800 Series Integrated Services Routers
(ISRs).
(ISRs).
Note
The 801 access point (the access point embedded in the 88xW ISR), the 1250 series access
point, and the 1140 series access point have a hardware limitation where beacons can only
be output at intervals that are multiples of 17 milliseconds. When these APs are configured
for a 100-millisecond beacon interval, they transmit beacons every 102 milliseconds.
Similarly, when the beacon interval is configured for 20 milliseconds, these APs transmit
beacons every 17 milliseconds.
point, and the 1140 series access point have a hardware limitation where beacons can only
be output at intervals that are multiples of 17 milliseconds. When these APs are configured
for a 100-millisecond beacon interval, they transmit beacons every 102 milliseconds.
Similarly, when the beacon interval is configured for 20 milliseconds, these APs transmit
beacons every 17 milliseconds.
Note
Only Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G) or
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
Note
For 5500 Series controller, the Dot1p value in the capwap packet between controller and the
AP is always 0 irrespective of the profile configured on the WLAN and the DSCP value.
AP is always 0 irrespective of the profile configured on the WLAN and the DSCP value.
Controller Requirements
The controller GUI requires the following operating system and web browser:
•
Windows XP SP1 (or later) or Windows 2000 SP4 (or later)
•
Internet Explorer 6.0 SP1 (or later) or Mozilla Firefox 2.0.0.11 (or later)
Note
Internet Explorer 6.0 SP1 (or later) and Mozilla Firefox 2.0.0.11 (or later) are the only
browsers supported for using the controller GUI and web authentication.
browsers supported for using the controller GUI and web authentication.