Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Technical References
OL-31229-01
3
Before You Begin
Before You Begin
Before you start the upgrade procedure, make sure you have all the components,
tools, and equipment ready.
tools, and equipment ready.
Components Required to Make the Split Change
Note: Part numbers differ depending on amplifier module type being modified and
desired final split.
desired final split.
(1) Reverse Amplifier PWB Assembly
(1) High Pass Filter Trim PWB Assembly
(2) Mirrored Diplex Filters
(1) Non-mirrored Diplex Filters
(1) RF Interface Board
Part number label
Tools and Equipment Required to Make the Split Change
1/2-inch socket driver
Torx T-10 screwdriver
Torx T-15 screwdriver
Flat-head screwdriver
Plug-in PWB extraction tool (Electronix Express Model #060404 or equivalent)
Torque wrench with 1/2-inch socket