Cisco Cisco Expressway
Priority
2
Description
“Add domain where none exists” for example
Pattern type
Regex
Pattern string
([^@]*)
Pattern behavior
Replace
Replace string
\1@exp.domain
State
Enabled
4. Click Create transform.
Creating a neighbor zone for Unified CM
1. Go to
Configuration > Zones > Zones
.
2. Click New.
3. Configure the fields as follows (leave all other fields with default values):
Name
CUCM Neighbor
Type
Neighbor
Hop count
15
H.323 mode
Off (H.323 is not supported between Expressway and Unified CM)
SIP mode
On
SIP port
5060 for TCP or 5061 for TLS (must match the port set on the SIP trunk)
Transport
TCP or TLS. Choose TLS if you want secure transport and encrypted media
Media encryption mode
Auto
Cisco Unified Communications Manager with Cisco Expressway (SIP Trunk) Deployment Guide (X8.6)
Page 15 of 37
Configuring Expressway routing