Cisco Cisco Unified MeetingPlace 5.3 Maintenance Manual

Copyright © 2004 Cisco Systems, Inc. All rights reserved.

This procedure describes how to replace the CD tray in the Cisco MeetingPlace 8106. In the 
Cisco MeetingPlace 8106, the CD-ROM drive and the floppy drive are housed in the same unit, called 
the CD tray. You cannot replace them separately, as they are connected. If you need to replace one, you 
automatically replace the other.

This procedure contains the following topics:

Follow these general guidelines:

If you want information about installing the Cisco MeetingPlace 8100 series hardware for the first 
time or information about upgrading the Cisco MeetingPlace 8100 series software, see the 
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following 
URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53inst/index.htm

.

If you want information about configuring the Cisco MeetingPlace 8100 series, see the 
Configuration Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53config/index.htm

.

For complete information about all of the Cisco conferencing documentation, including Regulatory 
Compliance and Safety Information for the Cisco MeetingPlace Series 8100, see the Guide to Cisco 
Conferencing Documentation and Support at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/roadmap.htm

.