Cisco Cisco IGX 8400 Modules Troubleshooting Guide
Software Error 514
Document ID: 10813
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Error Description
Related Information
Prerequisites
Requirements
Components Used
Conventions
Error Description
Related Information
Introduction
This document describes Software Error 514.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Error Description
Software Error 514 indicates that the software modified more memory than requested for a data element. If
the data field shows
the data field shows
0xXXADFACE
, the overwrite is only one byte (
XX
can be any value), and there is
probably not a problem. If the data field does not contain any of the
0xDEADFACE
flag, the overwrite is
possibly large, and must be investigated by engineering.
Large overwrites contribute to 1M3 aborts, as well as other data corruption problems. For example:
3. Error 514 00000000 30156EBC RSRC 9.3.20 07/19/03
08:27:21
USP 30358540 30 15 6E BC 00 00 02 02 00 00 00 00 00 02 04 80
0.n.............
USP 30358550 00 00 00 16 00 00 00 08 00 00 00 19 00 00 02 40
...............@
USP 30358560 30 BD 83 2C 30 24 02 80 30 B7 4B 2C 00 00 00 0C