Cisco Cisco Virtualization Experience Client 6215 Leaflet
תוימדק תואיצי
1
לש ימדקה קלחב תואיציה תא גיצמ אבה רויאה
.Cisco VXC 6215
346493
2
1
6
3
4
5
1
הלעפה ןצחל
2
תוליעפ תירונ
3
עמש טלפ
4
ןופורקימ טלק
5
USB 2.0 תואיצי יתש
6
דמעמ
ללוכ וניא ךא ,ללכומ לוקמר ללוכ ″הזר″ה חוקלה
הרעה
.ללכומ ןופורקימ
תוירוחא תואיצי
2
לש ירוחאה קלחב תואיציה תא גיצמ אבה רויאה
.Cisco VXC 6215
346494
13
7
8
10
9
14
15
11
12
7
)ישארה גצה שומישל( DVI-I ואדיו רבחמ
8
)ינשה גצה שומישל( DisplayPort ואדיו רבחמ
9
USB 2.0 תואיצי יתש
10
יפקיה דויצ םע שומישל( USB 3.0 תואיצי יתש
)רתוי הובג ספ בחורב
םע רוחאל תומיאת ןיא USB 3.0-לש ןכתיי
הרעה
.תדלקמב רתוי םינשי םישקמ המכ
11
10/100/1000BASE-T Gigabit Ethernet תאיצי
12
Kensington הליענ ץירח
13
הלעפה רבחמ
14
תא ךושמ( הניקת עדימ הליכמה היסיטרכ םע תיוות
)הגצהל היסיטרכה
15
)ןקתהה דצב( VESA תבכרהל םירבחמ העברא
תוטישהמ תחא תועצמאב ″הזר″ה חוקלה תא רדגה
1 בלש
:תואבה
וניאש( חוטש גרבמב וא בלצומ גרבמב שמתשה
.א
ביכרהל ידכ םיפרוצמה םיגרבה ינשבו )ףרוצמ
ןכמ רחאלו ,″הזר″ה חוקלה תיתחתל דמעמה תא
.ןחלוש לע ″הזר″ה חוקלה תא םקמ
הניאש( VESA תבכרהל הכרעב שמתשה
.ב
″הזר″ה חוקלה תא רבחל ידכ )תפרוצמ
.VESA תבכרהל
וניאש( רבכעהו תדלקמה ,ואדיווה תגוצת תא רבח
2 בלש
.תומיאתמה תואיציל )ףרוצמ
תשרל Gigabit Ethernet-ה תאיצי תא רבח
3 בלש
.10/100/1000BASE-T Ethernet
לש הלעפהה רבחמל הלעפהה םאתמ תא רבח
4 בלש
עקשל םאתמה תא רבח ןכמ רחאלו ,″הזר″ה חוקלה
. 50–60 Hz , 100–240V AC גוסמ ילמשח
המכ רבוע ″הזר″ה חוקלה .הלעפהה ןצחל לע ץחל
5 בלש
רחאל .הלעפהה תכרעמ תניעט ינפל לוחתא יכילהת
המותכה תוליעפה תירונ ,םיכילהתה ףצר תמלשה
.קוריל העבצ תא הנשמ
)תרפופשו המלצמ ןוגכ( יפקהה דויצה תא רבח
6 בלש
.תורתונה תואיציל
ידי-לע ךל ונתינש םירושיאה תועצמאב סנכיה
7 בלש
.תכרעמה להנמ
הקירמאב הרבחה הטמ
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
USA
http://www.cisco.com
408 526-4000 :ןופלט
800 553-NETS )6387(
408 527-0883 :סקפ
ב″הראב הלש תבה תורבח לש וא/ו Cisco לש םימושר םיירחסמ םינמיס וא םיירחסמ םינמיס םה Cisco לש למסהו Cisco
:האבה URL-ה תבותכ לא רובע ,Cisco לש םיירחסמ םינמיס לש המישרב תופצל ידכ .תורחא תונידמבו
םילעבה לש םניינק םה ישילש דצ תורבח לש םירכזומה םיירחסמה םינמיסה .
www.cisco.com/go/trademarks
)1110R( .תרחא הרבח לכל Cisco ןיב תופתוש יסחי לע תזמרמ הניא ףתוש הלימב שומישה .םימיאתמה
.תורומש תויוכזה לכ . © 2013 Cisco Systems, Inc
הריהמ הלחתה ךירדמ
346491
תייווח חוקל לש 6215 תרדס
Cisco לש היצזילאוטריווה
)Cisco VXC 6215(
תוימדק תואיצי
1
תוירוחא תואיצי
2
Cisco VXC 6215 תרדגה
3
Cisco VXC 6215 תרדגה
3
תא רידגהל ידכ םיאבה םידעצה יפ לע לעפ
.Cisco VXC 6215
Cisco VXC תא ליעפתו רידגתש ינפל
תוריהז
תועיפומה תורהצהה לכ תא ארק ,6215
:האבה URL-ה תבותכב
.
www.cisco.com/go/rcsi/vxc
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Cisco and any other company. (1110R)
© 2013 Cisco Systems, Inc. All rights reserved.
346491
Q
UICK
S
TART
G
UIDE
Cisco Virtualization
Experience Client 6215
(Cisco VXC 6215)
1
Front Ports
2
Rear Ports
3
Set Up the Cisco VXC 6215
Caution
Before you set up and operate the
Cisco VXC 6215, read all caution
statements listed at the following
URL:
Cisco VXC 6215, read all caution
statements listed at the following
URL:
www.cisco.com/go/rcsi/vxc
.
1
Front Ports
The following figure shows the ports on the front
of the Cisco VXC 6215.
of the Cisco VXC 6215.
Note
The thin client includes a built-in speaker,
but does not include a built-in
microphone.
but does not include a built-in
microphone.
1
Power button
2
Activity light
3
Audio output
4
Microphone input
5
Two USB 2.0 ports
6
Foot stand
346493
2
1
6
3
4
5
2
Rear Ports
The following figure shows the ports on the rear of
the Cisco VXC 6215.
the Cisco VXC 6215.
7
DVI-I video connector (use with primary
monitor)
monitor)
8
DisplayPort video connector (use with
second monitor)
second monitor)
9
Two USB 2.0 ports
10
Two USB 3.0 ports (for use with
higher-bandwidth peripherals)
higher-bandwidth peripherals)
Note
USB 3.0 may not be backwards
compatible with some older
keyboards.
compatible with some older
keyboards.
11
10/100/1000BASE-T Gigabit Ethernet port
12
Kensington lock slot
13
Power connector
14
Tabbed label containing regulatory
information (pull tab to view)
information (pull tab to view)
15
Four VESA mount connectors (on the side
of the device)
of the device)
346494
13
7
8
10
9
14
15
11
12
3
Set Up the Cisco VXC 6215
Follow these steps to set up the Cisco VXC 6215.
Step 1
Set up the thin client using either of the
following methods:
following methods:
a. Use a Phillips or flat head screwdriver
(not provided) and the two provided
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
b. Use a VESA mounting kit (not
provided) to attach the thin client to a
VESA mount.
VESA mount.
Step 2
Connect the video display, keyboard, and
mouse (not provided) to the appropriate
ports.
mouse (not provided) to the appropriate
ports.
Step 3
Connect the Gigabit Ethernet port to a
10/100/1000BASE-T Ethernet network.
10/100/1000BASE-T Ethernet network.
Step 4
Connect the power adapter to the thin
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
Step 5
Press the Power button. The thin client
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
Step 6
Connect your peripherals (such as camera
and handset) to the remaining ports.
and handset) to the remaining ports.
Step 7
Sign in using the credentials given to you
by your system administrator.
by your system administrator.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Cisco and any other company. (1110R)
© 2013 Cisco Systems, Inc. All rights reserved.
346491
Q
UICK
S
TART
G
UIDE
Cisco Virtualization
Experience Client 6215
(Cisco VXC 6215)
1
Front Ports
2
Rear Ports
3
Set Up the Cisco VXC 6215
Caution
Before you set up and operate the
Cisco VXC 6215, read all caution
statements listed at the following
URL:
Cisco VXC 6215, read all caution
statements listed at the following
URL:
www.cisco.com/go/rcsi/vxc
.
1
Front Ports
The following figure shows the ports on the front
of the Cisco VXC 6215.
of the Cisco VXC 6215.
Note
The thin client includes a built-in speaker,
but does not include a built-in
microphone.
but does not include a built-in
microphone.
1
Power button
2
Activity light
3
Audio output
4
Microphone input
5
Two USB 2.0 ports
6
Foot stand
346493
2
1
6
3
4
5
2
Rear Ports
The following figure shows the ports on the rear of
the Cisco VXC 6215.
the Cisco VXC 6215.
7
DVI-I video connector (use with primary
monitor)
monitor)
8
DisplayPort video connector (use with
second monitor)
second monitor)
9
Two USB 2.0 ports
10
Two USB 3.0 ports (for use with
higher-bandwidth peripherals)
higher-bandwidth peripherals)
Note
USB 3.0 may not be backwards
compatible with some older
keyboards.
compatible with some older
keyboards.
11
10/100/1000BASE-T Gigabit Ethernet port
12
Kensington lock slot
13
Power connector
14
Tabbed label containing regulatory
information (pull tab to view)
information (pull tab to view)
15
Four VESA mount connectors (on the side
of the device)
of the device)
346494
13
7
8
10
9
14
15
11
12
3
Set Up the Cisco VXC 6215
Follow these steps to set up the Cisco VXC 6215.
Step 1
Set up the thin client using either of the
following methods:
following methods:
a. Use a Phillips or flat head screwdriver
(not provided) and the two provided
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
b. Use a VESA mounting kit (not
provided) to attach the thin client to a
VESA mount.
VESA mount.
Step 2
Connect the video display, keyboard, and
mouse (not provided) to the appropriate
ports.
mouse (not provided) to the appropriate
ports.
Step 3
Connect the Gigabit Ethernet port to a
10/100/1000BASE-T Ethernet network.
10/100/1000BASE-T Ethernet network.
Step 4
Connect the power adapter to the thin
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
Step 5
Press the Power button. The thin client
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
Step 6
Connect your peripherals (such as camera
and handset) to the remaining ports.
and handset) to the remaining ports.
Step 7
Sign in using the credentials given to you
by your system administrator.
by your system administrator.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Cisco and any other company. (1110R)
© 2013 Cisco Systems, Inc. All rights reserved.
346491
Q
UICK
S
TART
G
UIDE
Cisco Virtualization
Experience Client 6215
(Cisco VXC 6215)
1
Front Ports
2
Rear Ports
3
Set Up the Cisco VXC 6215
Caution
Before you set up and operate the
Cisco VXC 6215, read all caution
statements listed at the following
URL:
Cisco VXC 6215, read all caution
statements listed at the following
URL:
www.cisco.com/go/rcsi/vxc
.
1
Front Ports
The following figure shows the ports on the front
of the Cisco VXC 6215.
of the Cisco VXC 6215.
Note
The thin client includes a built-in speaker,
but does not include a built-in
microphone.
but does not include a built-in
microphone.
1
Power button
2
Activity light
3
Audio output
4
Microphone input
5
Two USB 2.0 ports
6
Foot stand
346493
2
1
6
3
4
5
2
Rear Ports
The following figure shows the ports on the rear of
the Cisco VXC 6215.
the Cisco VXC 6215.
7
DVI-I video connector (use with primary
monitor)
monitor)
8
DisplayPort video connector (use with
second monitor)
second monitor)
9
Two USB 2.0 ports
10
Two USB 3.0 ports (for use with
higher-bandwidth peripherals)
higher-bandwidth peripherals)
Note
USB 3.0 may not be backwards
compatible with some older
keyboards.
compatible with some older
keyboards.
11
10/100/1000BASE-T Gigabit Ethernet port
12
Kensington lock slot
13
Power connector
14
Tabbed label containing regulatory
information (pull tab to view)
information (pull tab to view)
15
Four VESA mount connectors (on the side
of the device)
of the device)
346494
13
7
8
10
9
14
15
11
12
3
Set Up the Cisco VXC 6215
Follow these steps to set up the Cisco VXC 6215.
Step 1
Set up the thin client using either of the
following methods:
following methods:
a. Use a Phillips or flat head screwdriver
(not provided) and the two provided
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
b. Use a VESA mounting kit (not
provided) to attach the thin client to a
VESA mount.
VESA mount.
Step 2
Connect the video display, keyboard, and
mouse (not provided) to the appropriate
ports.
mouse (not provided) to the appropriate
ports.
Step 3
Connect the Gigabit Ethernet port to a
10/100/1000BASE-T Ethernet network.
10/100/1000BASE-T Ethernet network.
Step 4
Connect the power adapter to the thin
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
Step 5
Press the Power button. The thin client
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
Step 6
Connect your peripherals (such as camera
and handset) to the remaining ports.
and handset) to the remaining ports.
Step 7
Sign in using the credentials given to you
by your system administrator.
by your system administrator.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Cisco and any other company. (1110R)
© 2013 Cisco Systems, Inc. All rights reserved.
346491
Q
UICK
S
TART
G
UIDE
Cisco Virtualization
Experience Client 6215
(Cisco VXC 6215)
1
Front Ports
2
Rear Ports
3
Set Up the Cisco VXC 6215
Caution
Before you set up and operate the
Cisco VXC 6215, read all caution
statements listed at the following
URL:
Cisco VXC 6215, read all caution
statements listed at the following
URL:
www.cisco.com/go/rcsi/vxc
.
1
Front Ports
The following figure shows the ports on the front
of the Cisco VXC 6215.
of the Cisco VXC 6215.
Note
The thin client includes a built-in speaker,
but does not include a built-in
microphone.
but does not include a built-in
microphone.
1
Power button
2
Activity light
3
Audio output
4
Microphone input
5
Two USB 2.0 ports
6
Foot stand
346493
2
1
6
3
4
5
2
Rear Ports
The following figure shows the ports on the rear of
the Cisco VXC 6215.
the Cisco VXC 6215.
7
DVI-I video connector (use with primary
monitor)
monitor)
8
DisplayPort video connector (use with
second monitor)
second monitor)
9
Two USB 2.0 ports
10
Two USB 3.0 ports (for use with
higher-bandwidth peripherals)
higher-bandwidth peripherals)
Note
USB 3.0 may not be backwards
compatible with some older
keyboards.
compatible with some older
keyboards.
11
10/100/1000BASE-T Gigabit Ethernet port
12
Kensington lock slot
13
Power connector
14
Tabbed label containing regulatory
information (pull tab to view)
information (pull tab to view)
15
Four VESA mount connectors (on the side
of the device)
of the device)
346494
13
7
8
10
9
14
15
11
12
3
Set Up the Cisco VXC 6215
Follow these steps to set up the Cisco VXC 6215.
Step 1
Set up the thin client using either of the
following methods:
following methods:
a. Use a Phillips or flat head screwdriver
(not provided) and the two provided
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
b. Use a VESA mounting kit (not
provided) to attach the thin client to a
VESA mount.
VESA mount.
Step 2
Connect the video display, keyboard, and
mouse (not provided) to the appropriate
ports.
mouse (not provided) to the appropriate
ports.
Step 3
Connect the Gigabit Ethernet port to a
10/100/1000BASE-T Ethernet network.
10/100/1000BASE-T Ethernet network.
Step 4
Connect the power adapter to the thin
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
Step 5
Press the Power button. The thin client
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
Step 6
Connect your peripherals (such as camera
and handset) to the remaining ports.
and handset) to the remaining ports.
Step 7
Sign in using the credentials given to you
by your system administrator.
by your system administrator.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks
. Third-party trademarks mentioned are the property of their
respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)
Cisco and any other company. (1110R)
© 2013 Cisco Systems, Inc. All rights reserved.
346491
Q
UICK
S
TART
G
UIDE
Cisco Virtualization
Experience Client 6215
(Cisco VXC 6215)
1
Front Ports
2
Rear Ports
3
Set Up the Cisco VXC 6215
Caution
Before you set up and operate the
Cisco VXC 6215, read all caution
statements listed at the following
URL:
Cisco VXC 6215, read all caution
statements listed at the following
URL:
www.cisco.com/go/rcsi/vxc
.
1
Front Ports
The following figure shows the ports on the front
of the Cisco VXC 6215.
of the Cisco VXC 6215.
Note
The thin client includes a built-in speaker,
but does not include a built-in
microphone.
but does not include a built-in
microphone.
1
Power button
2
Activity light
3
Audio output
4
Microphone input
5
Two USB 2.0 ports
6
Foot stand
346493
2
1
6
3
4
5
2
Rear Ports
The following figure shows the ports on the rear of
the Cisco VXC 6215.
the Cisco VXC 6215.
7
DVI-I video connector (use with primary
monitor)
monitor)
8
DisplayPort video connector (use with
second monitor)
second monitor)
9
Two USB 2.0 ports
10
Two USB 3.0 ports (for use with
higher-bandwidth peripherals)
higher-bandwidth peripherals)
Note
USB 3.0 may not be backwards
compatible with some older
keyboards.
compatible with some older
keyboards.
11
10/100/1000BASE-T Gigabit Ethernet port
12
Kensington lock slot
13
Power connector
14
Tabbed label containing regulatory
information (pull tab to view)
information (pull tab to view)
15
Four VESA mount connectors (on the side
of the device)
of the device)
346494
13
7
8
10
9
14
15
11
12
3
Set Up the Cisco VXC 6215
Follow these steps to set up the Cisco VXC 6215.
Step 1
Set up the thin client using either of the
following methods:
following methods:
a. Use a Phillips or flat head screwdriver
(not provided) and the two provided
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
screws to affix the foot stand to the
bottom of the thin client, and then place
the thin client on a desk.
b. Use a VESA mounting kit (not
provided) to attach the thin client to a
VESA mount.
VESA mount.
Step 2
Connect the video display, keyboard, and
mouse (not provided) to the appropriate
ports.
mouse (not provided) to the appropriate
ports.
Step 3
Connect the Gigabit Ethernet port to a
10/100/1000BASE-T Ethernet network.
10/100/1000BASE-T Ethernet network.
Step 4
Connect the power adapter to the thin
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
client power connector, and then connect
the adapter to a 100–240V AC, 50–60 Hz
electrical outlet.
Step 5
Press the Power button. The thin client
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
goes through several boot sequence
procedures before the operating system
loads. When the sequence is complete, the
amber activity light changes to green.
Step 6
Connect your peripherals (such as camera
and handset) to the remaining ports.
and handset) to the remaining ports.
Step 7
Sign in using the credentials given to you
by your system administrator.
by your system administrator.