Cisco Cisco UCS EN120S M2 Software Technical Manual
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Supported Hardware Platforms
ISR G2 Devices with UCS-E Blades
ISR 4000 Devices with UCS-E Blades
Licenses
Limitations
Configure
Network Diagram
Workflow for FirePOWER Services on UCS-E
Configure the CIMC
Connect to the CIMC
Configure the CIMC
Install ESXi
Install the vSphere Client
Download the vSphere Client
Launch the vSphere Client
Deploy the FireSIGHT Management Center and FirePOWER Devices
Configure the Interfaces
Configure the vSwitch Interfaces on the ESXi
Register the FirePOWER Device with the FireSIGHT Management Center
Redirect and Verify Traffic
Redirect Traffic from the ISR to the Sensor on the UCS-E
Verify Packet Redirection
Verify
Troubleshoot
Related Information
Introduction
This document describes how to install and deploy Cisco FirePOWER software on a Cisco Unified
Computing System E Series (UCS-E) blade platform in Instusion Detection System (IDS) mode.
The configuration example that is described in this document is a supplement to the official user
guide.
Computing System E Series (UCS-E) blade platform in Instusion Detection System (IDS) mode.
The configuration example that is described in this document is a supplement to the official user
guide.
Prerequisites
Requirements