Cisco Cisco Expressway
for further information about
user=phone).
For this scenario, anything with a domain ciscotp.com will be matched (and passed to Lync via the B2BUA);
no transformation is required.
no transformation is required.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
3. Configure the search rule so that all calls to URIs in the format .+@ciscotp.com.* are forwarded to Lync.
Rule name
To Lync
Priority
100
Source
Any
Mode
Alias pattern match
Pattern type
Regex
Pattern string
.+@ciscotp\.com.*
Pattern behavior
Leave
On successful match
Stop
Target zone
To Microsoft Lync Server via B2BUA
4. Click Save.
Note: never use a Mode of Any alias. Always use a pattern string which matches the Lync domain as closely
as possible so that only calls, notifies and other messages that are handled by Lync get sent to it. If Any alias
were to be selected, then all calls and other messages would be routed to Lync — subject to no higher priority
search rules matching — whether or not Lync supports that call or message and it may introduce delays, or
worse cause calls to fail.
as possible so that only calls, notifies and other messages that are handled by Lync get sent to it. If Any alias
were to be selected, then all calls and other messages would be routed to Lync — subject to no higher priority
search rules matching — whether or not Lync supports that call or message and it may introduce delays, or
worse cause calls to fail.
Microsoft Lync and Cisco Expressway Deployment Guide (X8.5)
Page 36 of 71
Enabling endpoints registered on the video network to call clients registered on Lync