Cisco Cisco Expressway
9.
Go to Status > Alarms. If there is an alarm that the Expressway must be restarted, go to Maintenance >
Restart options and then click Restart.
Restart options and then click Restart.
If multiple peers need restarting: restart each peer in turn, waiting for the peer to be accessible through the
web interface before restarting the next peer.
web interface before restarting the next peer.
10.
Check that configuration data exists as expected:
—
If FindMe is in use, check that the expected FindMe entries still exist (Status > Applications > TMS
Provisioning Extension Services > FindMe > Accounts).
Provisioning Extension Services > FindMe > Accounts).
—
Check configuration for items from the System, Configuration and Application menus.
On other devices:
If you have any other Expressways neighbored (or connected via a traversal zone) to this cluster of Expressway peers,
ensure that their zone configuration for this cluster is updated to include the address of this new peer.
ensure that their zone configuration for this cluster is updated to include the address of this new peer.
On each Expressway peer (including the primary and this new Expressway peer):
Go to Status > Alarms. If there is an alarm that the Expressway must be restarted, go to Maintenance > Restart
options and then click Restart.
options and then click Restart.
If multiple peers need restarting: restart each peer in turn, waiting for the peer to be accessible through the web
interface before restarting the next peer.
interface before restarting the next peer.
Check Replication Status
It can take 5 or more minutes before Expressway reports the successful status. If problems are seen, refresh the
screen after waiting 5 minutes.
screen after waiting 5 minutes.
On Expressway:
1.
Go to System > Clustering and check that the cluster database status reports as Active.
2.
If Cisco TMS is being used, ensure that Cisco TMS has all the correct settings for this upgraded Expressway by
forcing a refresh of Cisco TMS.
forcing a refresh of Cisco TMS.
On Cisco TMS:
1.
For every Expressway in the cluster (including the primary Expressway):
a.
Select Systems > Navigator (and any required sub folders) and click on the name of the Expressway.
b.
Select the Settings tab.
c.
Click Force Refresh.
2.
Repeat for all Expressway peers in the cluster.
Next Steps
If the cluster has non-default trusted CA certificate and / or non default server certificate ensure that the added peer
is configured with the required trusted CA certificate and an appropriate server certificate.
is configured with the required trusted CA certificate and an appropriate server certificate.
Adding an X8.8 Expressway to an Expressway X8.8 cluster is now complete.
19
Cisco Expressway Cluster Creation and Maintenance Deployment Guide
Add a Peer to a Cluster