Cisco Cisco Unified MeetingPlace 5.3 Maintenance Manual

Page of 6
 
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Modem Replacement Procedure for the Cisco 
MeetingPlace 8100 Series
This procedure describes how to replace the external modem for the Cisco MeetingPlace 8100 series and 
contains the following topics:
Additional References
Follow these general guidelines:
If you want information about installing the Cisco MeetingPlace 8100 series hardware for the first 
time or information about upgrading the Cisco MeetingPlace 8100 series software, see the 
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following 
URL:
http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53inst/index.htm
.
If you want information about configuring the Cisco MeetingPlace 8100 series, see the 
Configuration Guide for Cisco MeetingPlace Audio Server Release 5.3 at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/audio/53/53config/index.htm
.
For complete information about all of the Cisco conferencing documentation, including Regulatory 
Compliance and Safety Information for the Cisco MeetingPlace Series 8100
, see the Guide to Cisco 
Conferencing Documentation and Support
 at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/conf/mtgplace/roadmap.htm
.
Before Replacing the Modem
This section contains the following topic: