Cisco Cisco Expressway
On this primary Expressway peer:
1.
Log in to the web browser of this Expressway.
2.
Go to Status > Alarms.
If there is an alarm that the Expressway must be restarted, go to Maintenance > Restart options and then click
Restart.
Restart.
3.
If the Expressway did not need to be restarted, ensure that maintenance mode is disabled.
a.
Go to Maintenance > Maintenance mode.
b.
Set Maintenance mode to
Off.
c.
Click Save.
Next Steps
Go to Status > Alarms and ensure that all alarms are acted upon and cleared.
The setup of the new cluster (of one Expressway) is complete; add other Expressways to the cluster using
.
.
10
Cisco Expressway Cluster Creation and Maintenance Deployment Guide