Cisco Cisco Expressway
On this subordinate Expressway peer:
1.
Go to Status > Alarms and ensure that all alarms are acted upon and cleared.
2.
Check that configuration data exists as expected (System, Configuration and Application menus).
3.
Repeat these steps for each subordinate peer.
Check Cluster Status
Do this after you have completed upgrading all peers .
On each Expressway (including the primary), go to System > Clustering and check that the cluster database status
reports as Active.
reports as Active.
Your cluster is now upgraded to X8.7.
7
Cisco Expressway Cluster Creation and Maintenance Deployment Guide