Cisco Cisco Expressway
of this master Expressway.
On this master Expressway peer:
1. Log in to the web browser of this Expressway.
2. Go to
Status > Alarms
.
If there is an alarm that the Expressway must be restarted, go to
Maintenance > Restart options
and
then click Restart.
3. If the Expressway did not need to be restarted, ensure that maintenance mode is disabled.
a. Go to
Maintenance > Maintenance mode
.
b. Set Maintenance mode to Off.
c. Click Save.
c. Click Save.
After the master peer configuration
Go to
Status > Alarms
and ensure that all alarms are acted upon and cleared.
The setup of the new cluster (of one Expressway) is complete; add other Expressways to the cluster using
Cisco Expressway Cluster Creation and Maintenance Deployment Guide (X8.5)
Page 11 of 38
Setting up a new cluster of Expressway peers