Cisco Cisco Expressway
Prerequisites
Before you begin any of the tasks in this guide, make sure that the following prerequisites are complete.
General prerequisites
■
We recommend that you use the Expressway web user interface to do the system configuration. This guide
assumes that you are using a web browser running on a PC. The PC needs an Ethernet connection to a LAN
which can route HTTP(S) traffic to the Expressway.
assumes that you are using a web browser running on a PC. The PC needs an Ethernet connection to a LAN
which can route HTTP(S) traffic to the Expressway.
■
.
■
available for reference before you start.
IP address and password prerequisites
This guide also assumes that you have already configured a static IP address and changed the default passwords, as
described in the appropriate installation guide:
described in the appropriate installation guide:
■
■
.
Note:
Expressway requires a static IP address. It doesn't use DHCP/SLAAC to get an IP address.
DNS, NAT/firewall, and DHCP prerequisites
The following non-Expressway system configuration needs to be in place before you start:
■
■
■
DHCP server configuration (not described in this document).
13
Cisco Expressway-E and Expressway-C - Basic Configuration Deployment Guide
Prerequisites