Cisco Cisco Expressway
1.
Go to System > External manager.
2.
Configure the fields as follows:
Expressway-C
Expressway-
E
E
Address
Enter 10.0.0.14
Same as
Expressway-
C
Expressway-
C
Path
Enter tms/public/external/management/
SystemManagementService.asmx
Protocol
Select HTTP or HTTPS
Certificate
verification
mode
verification
mode
Select On or Off
The certificate is only verified if the value is On and the protocol is set to
HTTPS. If you switch this on then Cisco TMS and Expressway must have
appropriate certificates.
appropriate certificates.
3.
Click Save.
Task 17: Configuring Logging (Optional)
The following configuration enables event logs to be sent to an external logging server using the SYSLOG protocol.
■
The Local event log verbosity setting controls the granularity of event logging. 1 is the least verbose, 4 the
most.
most.
■
We recommend a minimum level of 2. This provides both system and basic signaling message logging.
To configure a logging server:
40
Cisco Expressway-E and Expressway-C - Basic Configuration Deployment Guide
Optional Configuration Tasks