Cisco Cisco Expressway
If the secure connection test was successful, or if you did not enable TLS verify mode, then the
system attempts to contact the publisher and retrieve details of its associated nodes.
system attempts to contact the publisher and retrieve details of its associated nodes.
3. Repeat the discovery procedure for other Unified CM nodes/clusters, if required.
4. Click Refresh servers to refresh all the node details after configuring multiple publisher addresses.
Discovering Cisco Unity Connection servers
1. On Expressway-C, go to
Configuration > Unified Communications > Unity Connection servers
.
The page lists any Cisco Unity Connection nodes that have already been discovered.
2. Add the details of a Cisco Unity Connection publisher node:
a. Click New.
b. Enter the Unity Connection address.
b. Enter the Unity Connection address.
You can enter an FQDN or an IP address, but we recommend using the FQDN when TLS verify
mode is On.
mode is On.
c. Enter the Username and Password of an account that can access this server.
Note: These credentials are stored permanently in the Expressway database.
d. [Recommended] Leave TLS verify mode switched On to ensure Expressway verifies the node's
tomcat certificate.
e. [Optional] Select which deployment this node/cluster will belong to.
The Deployment field does not show if you have not created multiple deployments. All nodes belong
to the default deployment if you choose not to use multiple deployments.
to the default deployment if you choose not to use multiple deployments.
f. Click Add address.
If you enabled TLS verify mode, then the Expressway tests whether a secure connection can be
established. It does this so you can find any TLS configuration errors before it continues the discovery
process.
If the secure connection test was successful, or if you did not enable TLS verify mode, then the
system attempts to contact the publisher and retrieve details of its associated nodes.
established. It does this so you can find any TLS configuration errors before it continues the discovery
process.
If the secure connection test was successful, or if you did not enable TLS verify mode, then the
system attempts to contact the publisher and retrieve details of its associated nodes.
3. Repeat the discovery procedure for other Cisco Unity Connection nodes/clusters, if required.
4. Click Refresh servers to refresh all the node details after configuring multiple publisher addresses.
Automatically generated zones and search rules
Expressway-C automatically generates non-configurable neighbor zones between itself and each discovered
Unified CM node. A TCP zone is always created, and a TLS zone is created also if the Unified CM node is
configured with a Cluster Security Mode (
Unified CM node. A TCP zone is always created, and a TLS zone is created also if the Unified CM node is
configured with a Cluster Security Mode (
System > Enterprise Parameters > Security Parameters
) of 1
(Mixed) (so that it can support devices provisioned with secure profiles). The TLS zone is configured with its
Unified Communications Mobile and Remote Access via Cisco Expressway Deployment Guide (X8.5.1)
Page 24 of 50
Configuring mobile and remote access on Expressway